Cisco WS-C3750E-24TD-E, Catalyst 3750E 24 10/100/1000+2*10GE(X2),265W,IPS s/w

190,00

Catalyst 3750E 24 10/100/1000+2*10GE(X2),265W,IPS s/w

Available on backorder

SKU: WS-C3750E-24TD-E Categories: , , Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Description

Cisco WS-C3750E-24TD-E, Catalyst 3750E 24 10/100/1000+2*10GE(X2),265W,IPS s/w.

Linkom-PC is your source for Refurbished Cisco WS-C3750E-24TD-E. Most Cisco WS-C3750E-24TD-E are available within 3-4 days.

We make sure each item you receive is ready to use. Any configuration is reset to factory default settings in our REF process.

If you cannot find the product you are searching for, please request a quote.

WHY LINKOM-PC?

  • Save 90%+ off the list
  • Professional Advice
  • Fully Tested
  • Fast Delivery

Cisco WS-C3750E-24TD-E Technical Specifications

Dimensions & Weight
Depth:46 cm
Height:4.5 cm
Weight:8.1 kg
Width:44.5 cm
Environmental Parameters
Humidity Range Operating:10 – 85%
Max Operating Temperature:45 °C
Min Operating Temperature:0 °C
Expansion / Connectivity
Interfaces:24 x 10Base-T/100Base-TX/1000Base-T – RJ-45 ¦ 1 x console – RJ-45 management ¦ 1 x 10Base-T/100Base-TX – RJ-45 management ¦ 1 x network stack device ¦ 2 x X2
General
Authentication Method:Kerberos, Secure Shell (SSH), RADIUS, TACACS+
Compliant Standards:IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s
Device Type:Switch – 24 ports – L3 – Managed – stackable
Enclosure Type:Rack-mountable 1U
Features:Layer 3 switching, Layer 2 switching, auto-sensing per device, DHCP support, auto-negotiation, ARP support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, traffic shaping, Broadcast Storm Control, IPv6 support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), Jumbo Frames support
Flash Memory:64 MB Flash
MAC Address Table Size:12K entries
Max Units In A Stack:9
Ports:24 x 10/100/1000 + 2 x X2
RAM:256 MB
Remote Management Protocol:SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, SSH
Routing Protocol:OSPF, BGP-4, IS-IS, RIP-1, RIP-2, EIGRP, HSRP, DVMRP, PIM-SM, static IP routing, PIM-DM, EIGRP for IPv6, OSPF for IPv6, OSPFv3, PIM-SSM, policy-based routing (PBR), RIPng
Status Indicators:Port transmission speed, port duplex mode, bandwidth utilization %, power, link OK, system, link/activity
Subtype:Gigabit Ethernet
Miscellaneous
Compliant Standards:TUV GS, CISPR 22 Class A, GOST, cUL, NOM, VCCI Class A ITE, EN55022 Class A, CB, AS/NZS 60950-1, AS/NZ 3548 Class A, CCC, MIC, RoHS, UL 60950-1, IEC 60950-1, EN 60950-1, FCC Part 15 A
MTBF:177,975 hours
Power
Features:Redundant Power System (RPS) connector
Power Device:Internal power supply
Voltage Required:AC 120/230 V (50/60 Hz)
Software / System Requirements
Software Included:Cisco IOS IP Services

Additional information

Refurbished

Refurbished, tested, any configuration is reset to factory default settings in our REF process.