Description
Cisco WS-C2960+48TC-S, Catalyst 2960 Plus 48 10/100 + 2 T/SFP LAN Lite.
The Cisco® Catalyst® 2960-Plus Series Switches are fixed-configuration Fast Ethernet switches (Figure 1) that provide enterprise-class Layer 2 switching for branch offices, conventional workspaces, and infrastructure applications. They enable reliable and secure operations with lower total cost of ownership through a range of Cisco IOS® software features, including Cisco Catalyst SmartOperations.
Linkom-PC is your source for Refurbished Cisco WS-C2960+48TC-S. Most Cisco WS-C2960+48TC-S are available within 3-4 days.
We make sure each item you receive is ready to use. Any configuration is reset to factory default settings in our REF process.
If you cannot find the product you are searching for, please request a quote.
WHY LINKOM-PC?
- Save 90%+ off the list
- Professional Advice
- Fully Tested
- Fast Delivery
Cisco WS-C2960+48TC-S Technical Specifications
Dimensions & Weight | |
---|---|
Depth: | 24.2 cm |
Height: | 4.4 cm |
Weight: | 3.6 kg |
Width: | 45 cm |
Environmental Parameters | |
---|---|
Humidity Range Operating: | 10 – 95% (non-condensing) |
Humidity Range Storage: | 10 – 95% (non-condensing) |
Max Operating Temperature: | 45 °C |
Max Storage Temperature: | 70 °C |
Min Operating Temperature: | -5 °C |
Min Storage Temperature: | -25 °C |
Expansion / Connectivity | |
---|---|
Interfaces: | 48 x 100Base-TX RJ-45 ¦ 2 x 1000Base-T RJ-45 ¦ 2 x SFP |
General | |
---|---|
Authentication Method: | RADIUS, TACACS+ |
Capacity: | Active VLANs: 64 |
Compliant Standards: | IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ab (LLDP) |
Device Type: | Switch – 48 ports – Managed |
Enclosure Type: | Rack-mountable 1U |
Features: | Layer 2 switching, DHCP support, BOOTP support, ARP support, VLAN support, Syslog support, DiffServ support, IPv6 support, full duplex mode, Spanning Tree Protocol (STP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Quality of Service (QoS), Dynamic ARP Inspection (DAI), Cisco EnergyWise technology, Shaped Round Robin (SRR), LLDP support, DHCP relay, Port Security, Management Information Base (MIB), Class of Service (CoS), FTP client, DiffServ Code Point (DSCP) support, IGMP filtering, Storm Control, IP source guard, Weighted Tail Drop (WTD) |
Flash Memory: | 64 MB |
Jumbo Frame Support: | 9018 bytes |
Performance: | Switching capacity: 16 Gbps ¦ Forwarding performance (64-byte packet size): 10.1 Mpps |
Ports: | 48 x 10/100 + 2 x combo Gigabit SFP |
RAM: | 128 MB |
Remote Management Protocol: | SNMP 1, RMON 1, RMON 2, Telnet, SNMP 3, SNMP 2c, HTTP, TFTP, CLI |
Routing Protocol: | IGMPv3 |
Status Indicators: | Port status, port transmission speed, port duplex mode, system, link/activity |
Subtype: | Fast Ethernet |
Miscellaneous | |
---|---|
Compliant Standards: | CISPR 22 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, EN55022 Class A, AS/NZS 60950-1, ICES-003 Class A, RoHS, FCC CFR47 Part 15, UL 60950-1 Second Edition, Directive 2004/108/EC, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, Directive 2006/95/EC, Directive 2011/65/EU, VCCI Class A, KN24, CNS 13438(95) Class A, KN22 Class A, AS/NZS CISPR22:2004 Class A, CAN/CSA-C22.2 No. 60950-1, EN 300386 |
MTBF: | 623,000 hours |
Power | |
---|---|
Features: | Redundant Power System (RPS) connector |
Power Device: | Internal power supply |
Voltage Required: | AC 120/230 V (50/60 Hz) |
Software / System Requirements | |
---|---|
Software Included: | Cisco IOS LAN Lite |