Description
Cisco N5548UP-4N2248TF, Nexus 5548UP/4xN2248TP/32xFET.
Linkom-PC is your source for Refurbished Cisco N5548UP-4N2248TF. Most Cisco N5548UP-4N2248TF are available within 3-4 days.
We make sure each item you receive is ready to use. Any configuration is reset to factory default settings in our REF process.
If you cannot find the product you are searching for, please request a quote.
WHY LINKOM-PC?
- Save 90%+ off the list
- Professional Advice
- Fully Tested
- Fast Delivery
Cisco N5548UP-4N2248TF Technical Specifications
Dimensions & Weight | |
---|---|
Depth: | 74.9 cm |
Height: | 4.4 cm |
Width: | 43.9 cm |
Environmental Parameters | |
---|---|
Humidity Range Operating: | 5 – 95% (non-condensing) |
Max Operating Temperature: | 40 °C |
Min Operating Temperature: | 0 °C |
Expansion / Connectivity | |
---|---|
Expansion Slots: | 1 (total) / 1 (free) x Expansion Slot |
Interfaces: | 32 x SFP+ ¦ 1 x 1000Base-T RJ-45 management ¦ 1 x console management |
General | |
---|---|
Authentication Method: | RADIUS, TACACS+, MS-CHAP |
Compliant Standards: | IEEE 802.3, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.3ae, IEEE 802.1s, IEEE 801.1p |
Device Type: | Switch – 32 ports – Managed – with 4 x Cisco Nexus 2248TP GE Fabric Extender, 32x 10G SFP+ module (FET-10G) |
Enclosure Type: | Rack-mountable 1U |
Encryption Algorithm: | AES |
Features: | Layer 2 switching, VLAN support, Syslog support, Weighted Round Robin (WRR) queuing, Broadcast Storm Control, Multicast Storm Control, Unicast Storm Control, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Access Control List (ACL) support, Quality of Service (QoS), Jumbo Frames support, Rapid Per-VLAN Spanning Tree Plus (PVRST+) |
Jumbo Frame Support: | 9216 bytes |
MAC Address Table Size: | 32K entries |
Ports: | 32 x SFP+ |
Remote Management Protocol: | SNMP 1, SNMP 2, RMON, Telnet, SNMP 3, SSH-2, CLI |
Subtype: | 10 Gigabit Ethernet |
Power | |
---|---|
Installed Qty: | 2 |
Power Device: | Internal power supply – hot-plug |
Power Redundancy: | Yes |
Power Redundancy Scheme: | 1+1 |
Voltage Required: | AC 120/230 V (50/60 Hz) |