Sale!

Cisco CISCO887VA-SEC-K9, Cisco 887 VDSL/ADSL over POTS Multi-mode Router w/ Adv IP

80,00

Cisco CISCO887VA-SEC-K9, Cisco 887 VDSL/ADSL over POTS Multi-mode Router w/ Adv IP.

The Cisco 880VA Series Integrated Services Routers (ISRs) are part of the Cisco Integrated Services Routers Generation 2 (ISR G2) portfolio. The Cisco 880VA Series Routers support DSL multimode, including very-high-speed DSL 2 (VDSL2) and asymmetric DSL 2+ (ADSL2+). The routers support VDSL2 and ADSL2+ on a single WAN interface, thus providing secure, cost-effective connectivity to small businesses, enterprise small branch offices, and teleworker sites.

Linkom-PC is your source for Refurbished Cisco CISCO887VA-SEC-K9. Most Cisco CISCO887VA-SEC-K9 are available within 3-4 days.

We make sure each item you receive is ready to use. Any configuration is reset to factory default settings in our REF process.

If you cannot find the product you are searching for, please request a quote.

WHY LINKOM-PC?

  • Save 90%+ off the list
  • Professional Advice
  • Fully Tested
  • Fast Delivery

Cisco CISCO887VA-SEC-K9, Cisco 887 VDSL/ADSL over POTS Multi-mode Router w/ Adv IP.

The Cisco 880VA Series Integrated Services Routers (ISRs) are part of the Cisco Integrated Services Routers Generation 2 (ISR G2) portfolio. The Cisco 880VA Series Routers support DSL multimode, including very-high-speed DSL 2 (VDSL2) and asymmetric DSL 2+ (ADSL2+). The routers support VDSL2 and ADSL2+ on a single WAN interface, thus providing secure, cost-effective connectivity to small businesses, enterprise small branch offices, and teleworker sites.

Linkom-PC is your source for Refurbished Cisco CISCO887VA-SEC-K9. Most Cisco CISCO887VA-SEC-K9 are available within 3-4 days.

We make sure each item you receive is ready to use. Any configuration is reset to factory default settings in our REF process.

If you cannot find the product you are searching for, please request a quote.

WHY LINKOM-PC?

  • Save 90%+ off the list
  • Professional Advice
  • Fully Tested
  • Fast Delivery

Cisco CISCO887VA-SEC-K9 Technical Specifications

Communications
Digital Signaling Protocol:ADSL2+, VDSL2
Protocols & Specifications:ITU G.994.1 (G.hs), ITU G.992.1 (G.DMT) Annex A, ITU G.992.3 Annex A, ITU G.993.2, ITU G.992.5 Annex A
Type:DSL modem
Dimensions & Weight
Depth:24.9 cm
Height:4.4 cm
Weight:2.5 kg
Width:32.5 cm
Environmental Parameters
Humidity Range Operating:10 – 85%
Max Operating Temperature:40 °C
Min Operating Temperature:0 °C
Expansion / Connectivity
Expansion Slots:1 (total) / 1 (free) x ExpressCard ¦ 1 (total) / 1 (free) x SO-DIMM 200-pin
Interfaces:LAN: 4 x 10Base-T/100Base-TX – RJ-45 ¦ Management: 1 x console – RJ-45 ¦ WAN: 1 x ADSL2+ ¦ USB: 1 x 4 pin USB Type A ¦ WAN: 1 x VDSL2
General
Authentication Method:RADIUS, TACACS+
Capacity:IPSec VPN tunnels: 20
Compliant Standards:IEEE 802.1D, IEEE 802.1Q, IEEE 802.1x, VCCI-II, EN55024, CSA 22.2 No. 60950, EN55022 Class B, AS/NZ 3548 Class B, AS/NZS 60950-1, CS-03, EN 60555-2, UL 60950-1, IEC 60950-1
Connectivity Technology:Wired
Data Link Protocol:Ethernet, Fast Ethernet
Device Type:Router – 4-port switch (integrated)
Enclosure Type:Desktop
Encryption Algorithm:LEAP, DES, Triple DES, MD5, TLS, PEAP, TTLS, TKIP, WPA, WPA2, WPA-PSK, PKI, 128-bit AES, 192-bit AES, 256-bit AES
Features:Firewall protection, auto-sensing per device, DHCP support, NAT support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Stateful Packet Inspection (SPI), DiffServ support, MAC address filtering, Broadcast Storm Control, IPv6 support, Low-latency queuing (LLQ), Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), Spanning Tree Protocol (STP) support, Access Control List (ACL) support, Quality of Service (QoS), Link Fragmentation and Interleaving (LFI), Dynamic Multipoint VPN (DMVPN), DHCP server, Virtual Route Forwarding-Lite (VRF-Lite), DNS proxy
Flash Memory:128 MB
Network / Transport Protocol:L2TP, IPSec, PPPoE, PPPoA
RAM:256 MB (installed) / 768 MB (max) – DDR2 SDRAM – SO-DIMM 200-pin
Remote Management Protocol:Telnet, SNMP 3, HTTP, HTTPS, SSH
Routing Protocol:OSPF, RIP-1, RIP-2, BGP, EIGRP, HSRP, VRRP, NHRP, IGMPv3, GRE
Status Indicators:Port status, power
Power
Power Device:External power adapter – 60 Watt
Voltage Required:AC 120/230 V (50/60 Hz)
Software / System Requirements
OS Provided:Cisco IOS Advanced IP services

Additional information

Refurbished

Refurbished, tested, any configuration is reset to factory default settings in our REF process.