Description
Cisco C881G+7-K9, WAN FE (non-US) 3.7G HSPA+ R7 w/ SMS/GPS (MC8705).
The Cisco 880G Series Integrated Services Router with the embedded third-generation (3G) wireless WAN (WWAN) and dual radio 802.11n wireless LAN (WLAN) capabilities option provides secure high-speed wireless WAN and LAN connectivity to small businesses, enterprise small branch offices, and teleworker sites . Transparently integrated into the enterprise-class feature set available on the Cisco 880 Series, 3G, and WiFi wireless connectivity allows for rapid installation, deployment flexibility, and resilient mobile broadband backhaul for primary, WAN backup, and WiFi LAN.
Linkom-PC is your source for Refurbished Cisco C881G+7-K9. Most Cisco C881G+7-K9 are available within 3-4 days.
We make sure each item you receive is ready to use. Any configuration is reset to factory default settings in our REF process.
If you cannot find the product you are searching for, please request a quote.
WHY LINKOM-PC?
- Save 90%+ off the list
- Professional Advice
- Fully Tested
- Fast Delivery
Cisco C881G+7-K9 Technical Specifications
Aerial | |
---|---|
Aerial: | External detachable |
Antenna Qty: | 2 |
Gain Level: | 0 dBi |
Communications | |
---|---|
Cellular Protocol: | GPRS, UMTS, EDGE, HSDPA, HSPA, HSPA+ |
Max Transfer Rate: | 21.1 Mbps |
Type: | Wireless cellular modem |
Dimensions & Weight | |
---|---|
Depth: | 24.9 cm |
Height: | 4.4 cm |
Weight: | 2.5 kg |
Width: | 32.5 cm |
Environmental Parameters | |
---|---|
Humidity Range Operating: | 10 – 85% (non-condensing) |
Max Operating Temperature: | 40 °C |
Min Operating Temperature: | 0 °C |
Expansion / Connectivity | |
---|---|
Expansion Slots: | 1 (total) / 1 (free) x SO-DIMM 200-pin |
Interfaces: | LAN: 4 x 10Base-T/100Base-TX – RJ-45 ¦ WAN: 1 x 10Base-T/100Base-TX – RJ-45 ¦ Management: 1 x console – RJ-45 ¦ USB: 1 x 4 pin USB Type A |
General | |
---|---|
Authentication Method: | RADIUS, TACACS+ |
Capacity: | IPSec VPN tunnels: 20 |
Compliant Standards: | IEEE 802.1D, IEEE 802.1Q, IEEE 802.1x, IEEE 802.11i, IEEE 802.3ah, IEEE 802.1ag, VCCI-II, EN55024, CSA 22.2 No. 60950, EN55022 Class B, AS/NZ 3548 Class B, AS/NZS 60950-1, EN 60555-2, UL 60950-1, IEC 60950-1 |
Connectivity Technology: | Wired |
Data Link Protocol: | Ethernet, Fast Ethernet |
Device Type: | Router – 4-port switch (integrated) |
Enclosure Type: | Desktop |
Features: | NAT support, VPN support, load balancing, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, traffic shaping, Stateful Packet Inspection (SPI), content filtering, DiffServ support, MAC address filtering, IPv6 support, Intrusion Prevention System (IPS), URL filtering, Stateful Failover, Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), Spanning Tree Protocol (STP) support, Access Control List (ACL) support, Quality of Service (QoS), Link Fragmentation and Interleaving (LFI), Dynamic Multipoint VPN (DMVPN), WAN failover, DHCP server, Virtual Route Forwarding-Lite (VRF-Lite), DNS proxy, Bidirectional Forwarding Detection (BFD) |
Flash Memory: | 256 MB |
Network / Transport Protocol: | L2TP, RSVP, IPSec, PPPoE, PPPoA, FTP, DHCP, DNS, L2TPv3, DDNS |
RAM: | 512 MB (installed) / 1 GB (max) – DDR2 SDRAM – SO-DIMM 200-pin |
Remote Management Protocol: | Telnet, SNMP 3, HTTP, HTTPS, SSH, CLI |
Routing Protocol: | OSPF, RIP-1, RIP-2, BGP, EIGRP, HSRP, VRRP, NHRP, GRE, policy-based routing (PBR), WCCP |
Status Indicators: | Port status, power |
Miscellaneous | |
---|---|
Pricing Type: | Refurbished |
Power | |
---|---|
Power Device: | External power adapter – 60 Watt |
Voltage Required: | AC 120/230 V (50/60 Hz) |
Software / System Requirements | |
---|---|
OS Provided: | Cisco IOS Advanced IP services |