Description
Cisco WS-C3850-24XS-S, Cisco Catalyst 3850 24 Port 10G Fiber Switch IP Base.
Linkom-PC is your source for Refurbished Cisco WS-C3850-24XS-S. Most Cisco WS-C3850-24XS-S are available within 3-4 days.
We make sure each item you receive is ready to use. Any configuration is reset to factory default settings in our REF process.
If you cannot find the product you are searching for, please request a quote.
WHY LINKOM-PC?
- Save 90%+ off the list
- Professional Advice
- Fully Tested
- Fast Delivery
Cisco WS-C3850-24XS-S Technical Specifications
Dimensions & Weight | |
---|---|
Depth: | 45 cm |
Height: | 4.45 cm |
Weight: | 6.1 kg |
Width: | 44.5 cm |
Environmental Parameters | |
---|---|
Humidity Range Operating: | 10 – 95% (non-condensing) |
Max Operating Temperature: | 45 °C |
Max Storage Temperature: | 70 °C |
Min Operating Temperature: | -5 °C |
Min Storage Temperature: | -40 °C |
Expansion / Connectivity | |
---|---|
Expansion Slots: | 1 (total) / 1 (free) x Expansion Slot |
Interfaces: | 24 x 10GBase-X SFP+ ¦ 1 x USB Type A ¦ 1 x management (mini-USB) Type B ¦ 1 x console RJ-45 management ¦ 1 x management (Gigabit LAN) RJ-45 ¦ 2 x network stack device |
General | |
---|---|
Authentication Method: | Kerberos, Secure Shell (SSH), RADIUS, TACACS+ |
Capacity: | IPv4 routes: 24000 ¦ NetFlow entries: 48000 ¦ Switched virtual interfaces (SVIs): 1000 ¦ Virtual interfaces (VLANs): 4000 |
Compliant Standards: | IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s |
Device Type: | Switch – 24 ports – L3 – Managed – stackable |
Enclosure Type: | Desktop, rack-mountable 1U |
Features: | DHCP support, ARP support, Syslog support, PIM snooping, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), SSH support, Virtual Route Forwarding-Lite (VRF-Lite), Uni-Directional Link Detection (UDLD), Rapid Per-VLAN Spanning Tree Plus (PVRST+), Shaped Round Robin (SRR), Link Aggregation Control Protocol (LACP), Remote Switch Port Analyzer (RSPAN), Energy Efficient Ethernet, Virtual Routing and Forwarding (VRF), Cisco StackWise-480 technology, Cisco StackPower technology, Flexible NetFlow (FNF), 802.1x authentication, radio resource management (RRM), ARP inspection, Weighted Tail Drop (WTD), VLAN Trunking Protocol (VTP), Bridge protocol data unit (BPDU), Control plane protection (CoPP) |
Flash Memory: | 4 GB |
Jumbo Frame Support: | 9198 bytes |
MAC Address Table Size: | 32000 entries |
Performance: | Switching capacity: 640 Gbps ¦ Stacking bandwidth: 480 Gbps |
Ports: | 24 x 1 Gigabit / 10 Gigabit SFP+ |
RAM: | 4 GB |
Remote Management Protocol: | SNMP 1, RMON 1, RMON 2, Telnet, SNMP 3, SNMP 2c, TFTP, SSH, CLI |
Routing Protocol: | IS-IS, RIP-1, RIP-2, IGMPv2, IGMP, IGMPv3, policy-based routing (PBR), RIPng, MLDv2, MLD |
Status Indicators: | Port transmission speed, port duplex mode, power, system, active, status |
Subtype: | 10 Gigabit Ethernet |
Miscellaneous | |
---|---|
Compliant Standards: | CISPR 22 Class A, CISPR 24, EN 61000-3-2, NOM, EN 61000-3-3, EN55024, EN50082-1, EN 61000-6-1, EN 61000-4-4, EN 61000-4-2, EN 61000-4-3, EN 61000-4-6, CCC, ICES-003 Class A, EN 61000-4-5, FCC CFR47 Part 15, UL 60950-1, IEC 60950-1, EN 60950-1, UL 60950-1 Second Edition, KCC, RoHS, FCC Part 15 A, AS/NZS 3548 Class A, BSMI Class A, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, VCCI Class A, KN24, KN22 Class A, AS/NZS CISPR 22, CNS 13438, EN 55022 Class A, EN 300 386, CAN/CSA-C22.2 No. 60950-1 |
MTBF: | 307,990 hours |
Power | |
---|---|
Installed Qty: | 1 (installed) / 2 (max) |
Power Device: | Internal power supply |
Power Provided: | 715 Watt |
Power Redundancy: | Optional |
Power Redundancy Scheme: | 1+1 (with optional power supply) |
Voltage Required: | AC 120/230 V (50 – 60 Hz) |
Software / System Requirements | |
---|---|
Software Included: | Cisco IOS IP Base |