Cisco WS-C3750X-48PF-L, Catalyst 3750X 48 Port Full PoE LAN Base

380,00

Cisco WS-C3750X-48PF-L, Catalyst 3750X 48 Port Full PoE LAN Base.

Linkom-PC is your source for Refurbished Cisco WS-C3750X-48PF-L. Most Cisco WS-C3750X-48PF-L are available within 3-4 days.

We make sure each item you receive is ready to use. Any configuration is reset to factory default settings in our REF process.

If you cannot find the product you are searching for, please request a quote.

WHY LINKOM-PC?

  • Save 90%+ off the list
  • Professional Advice
  • Fully Tested
  • Fast Delivery

Available on backorder

SKU: WS-C3750X-48PF-L Categories: , , , , , Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Description

Cisco WS-C3750X-48PF-L, Catalyst 3750X 48 Port Full PoE LAN Base.

Linkom-PC is your source for Refurbished Cisco WS-C3750X-48PF-L. Most Cisco WS-C3750X-48PF-L are available within 3-4 days.

We make sure each item you receive is ready to use. Any configuration is reset to factory default settings in our REF process.

If you cannot find the product you are searching for, please request a quote.

WHY LINKOM-PC?

  • Save 90%+ off the list
  • Professional Advice
  • Fully Tested
  • Fast Delivery

Cisco WS-C3750X-48PF-L Technical Specifications

Dimensions & Weight
Depth:49.5 cm
Height:4.5 cm
Weight:7.6 kg
Width:44.5 cm
Environmental Parameters
Humidity Range Operating:5 – 95% (non-condensing)
Max Storage Temperature:70 °C
Min Operating Temperature:-5 °C
Min Storage Temperature:-40 °C
Expansion / Connectivity
Expansion Slots:1 (total) / 1 (free) x Expansion Slot
Interfaces:48 x 10Base-T/100Base-TX/1000Base-T – RJ-45 PoE ¦ 1 x USB Type A ¦ 1 x console – mini-USB Type B management ¦ 1 x RS-232 – RJ-45 management ¦ 1 x 10Base-T/100Base-TX – RJ-45 management ¦ 2 x network stack device
General
Authentication Method:Kerberos, Secure Shell (SSH), RADIUS, TACACS+
Capacity:Virtual interfaces (VLANs): 255
Compliant Standards:IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ae
Device Type:Switch – 48 ports – Managed – stackable
Enclosure Type:Rack-mountable 1U
Features:Hot swap module replacement, Layer 2 switching, dynamic IP address assignment, DHCP support, power over Ethernet (PoE), auto-negotiation, ARP support, trunking, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, traffic shaping, Broadcast Storm Control, High Availability, Multicast Storm Control, Unicast Storm Control, Rapid Spanning Tree Protocol (RSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), Jumbo Frames support, MLD snooping, Dynamic ARP Inspection (DAI), PoE+, Cisco StackWise Technology, Per-VLAN Spanning Tree Plus (PVST+), EIGRP Stub Routing, Uni-Directional Link Detection (UDLD), Shaped Round Robin (SRR), Link Aggregation Control Protocol (LACP), Remote Switch Port Analyzer (RSPAN)
Flash Memory:128 MB Flash
Jumbo Frame Support:9216 bytes
Max Units In A Stack:9
Performance:Switching fabric bandwidth: 160 Gbps
Ports:48 x 10/100/1000 (PoE)
Power Over Ethernet (PoE):PoE
RAM:256 MB
Remote Management Protocol:SNMP 1, SNMP 2, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, TFTP, SSH, CLI
Status Indicators:Port status, port transmission speed, port duplex mode, power, system, link/activity
Subtype:Gigabit Ethernet
Miscellaneous
Compliant Standards:TUV GS, CISPR 22 Class A, GOST, cUL, NOM, VCCI Class A ITE, EN55022 Class A, CB, AS/NZS 60950-1, AS/NZ 3548 Class A, CCC, RoHS, UL 60950-1, IEC 60950-1, EN 60950-1, KCC, FCC Part 15 A, CSA C22.2 No. 60950-1
MTBF:139,913 hours
Rack Mounting Kit:Included
Power
Features:Redundant Power System (RPS) connector
Installed Qty:1 (installed) / 2 (max)
Power Device:Internal power supply
Power Redundancy:Optional
Power Redundancy Scheme:1+1 (with optional power supply)
Voltage Required:AC 120/230 V (50/60 Hz)
Software / System Requirements
Software Included:Cisco IOS LAN Base

Additional information

Refurbished

Refurbished, tested, any configuration is reset to factory default settings in our REF process.