Description
Cisco WS-C3650-48FWQ-S, Catalyst 3650 48 Port FPoE 4x10G Uplink w/5 AP licenses IPB.
Linkom-PC is your source for Refurbished Cisco WS-C3650-48FWQ-S. Most Cisco WS-C3650-48FWQ-S are available within 3-4 days.
We make sure each item you receive is ready to use. Any configuration is reset to factory default settings in our REF process.
If you cannot find the product you are searching for, please request a quote.
WHY LINKOM-PC?
- Save 90%+ off the list
- Professional Advice
- Fully Tested
- Fast Delivery
Cisco WS-C3650-48FWQ-S Technical Specifications
Dimensions & Weight | |
---|---|
Depth: | 48.6 cm |
Height: | 4.4 cm |
Weight: | 7.8 kg |
Width: | 44.5 cm |
Environmental Parameters | |
---|---|
Humidity Range Operating: | 5 – 96% (non-condensing) |
Max Operating Temperature: | 45 °C |
Max Storage Temperature: | 70 °C |
Min Operating Temperature: | -5 °C |
Min Storage Temperature: | -40 °C |
Expansion / Connectivity | |
---|---|
Expansion Slots: | 1 (total) / 1 (free) x Stacking Module |
Interfaces: | 48 x 1000Base-T RJ-45 PoE+ – 30 W ¦ 1 x USB Type A ¦ 1 x serial (console) RJ-45 management ¦ 1 x management (Gigabit LAN) RJ-45 management ¦ 1 x management (mini-USB) Type B management ¦ 4 x 10GBase-X SFP+ uplink |
General | |
---|---|
Authentication Method: | Secure Shell (SSH), RADIUS, TACACS+ |
Capacity: | IPv4 routes: 24000 ¦ NetFlow entries: 48000 ¦ Virtual interfaces (VLANs): 1000 ¦ Switched virtual interfaces (SVIs): 1000 ¦ Manageable access points: 5 |
Compliant Standards: | IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ab (LLDP), IEEE 802.3at |
Device Type: | Switch – 48 ports – L3 – Managed – stackable |
Enclosure Type: | Desktop, rack-mountable 1U |
Features: | Layer 2 switching, ARP support, trunking, VLAN support, IGMP snooping, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Port Aggregation Protocol (PAgP) support, Access Control List (ACL) support, Quality of Service (QoS), RADIUS support, MLD snooping, Dynamic ARP Inspection (DAI), EIGRP Stub Routing, Uni-Directional Link Detection (UDLD), Rapid Per-VLAN Spanning Tree Plus (PVRST+), Link Aggregation Control Protocol (LACP), Remote Switch Port Analyzer (RSPAN), Energy Efficient Ethernet, Flexible NetFlow (FNF) |
Flash Memory: | 2 GB |
Jumbo Frame Support: | 9198 bytes |
MAC Address Table Size: | 32000 entries |
Performance: | Switching capacity: 176 Gbps ¦ Forwarding performance: 130.95 Mpps |
PoE Budget: | 775 W |
Ports: | 48 x 10/100/1000 (PoE+) + 4 x 10 Gigabit SFP+ |
Power Over Ethernet (PoE): | PoE+ |
RAM: | 4 GB |
Remote Management Protocol: | SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, SSH, CLI |
Routing Protocol: | OSPF, RIP-1, RIP-2, static IP routing, RIPng |
Status Indicators: | Port transmission speed, port duplex mode, system, active, status, PoE |
Subtype: | Gigabit Ethernet |
Miscellaneous | |
---|---|
Compliant Standards: | CISPR 22 Class A, GOST, BSMI CNS 13438 Class A, CISPR 24, EN 61000-3-2, NOM, EN 61000-3-3, EN55024, EN55022 Class A, ICES-003 Class A, RoHS, UL 60950-1 Second Edition, KCC, FCC Part 15 A, ISO 7779, CSA C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, VCCI Class A, KN24, KN22 Class A |
MTBF: | 383,760 hours |
Rack Mounting Kit: | Included |
Power | |
---|---|
Installed Qty: | 1 (installed) / 2 (max) |
Power Device: | Internal power supply – hot-plug |
Power Provided: | 1025 Watt |
Power Redundancy: | Optional |
Power Redundancy Scheme: | 1+1 (with optional power supply) |
Voltage Required: | AC 120/230 V (50/60 Hz) |
Software / System Requirements | |
---|---|
Software Included: | Cisco IOS IP Base |