Description
Cisco WS-C2960XR-48FPS-I, Catalyst 2960-XR 48 GigE PoE 740W, 4 x 1G SFP, IP Lite.
Cisco Catalyst 2960-XR series switches offer power resiliency with optional dual field-replaceable power supplies and IP Lite Cisco IOS software with dynamic routing and Layer 3 features. WS-C2960XR-48FPS-I is one of 2960-XR switches, IP Lite switch, supporting forty-eight 10/100/1000 Ethernet ports with POE+ and 4 x 1G SFP uplink interfaces. IP Lite Image enables basic access layer 3 routing features, such as RIPV1, V2, OSPF stub, EIGRP stub, HSRP, VRRP, PIM stub, etc.
Linkom-PC is your source for Refurbished Cisco WS-C2960XR-48FPS-I. Most Cisco WS-C2960XR-48FPS-I are available within 3-4 days.
We make sure each item you receive is ready to use. Any configuration is reset to factory default settings in our REF process.
If you cannot find the product you are searching for, please request a quote.
WHY LINKOM-PC?
- Save 90%+ off the list
- Professional Advice
- Fully Tested
- Fast Delivery
WS-C2960XR-48FPS-I Specification
WS-C2960XR-48FPS-I Specification | |
| Enclosure type | Rack-mountable – 1U |
| Ports | 48 x 10/100/1000 (POE+) + 4 x 1G SFP |
| Network management Interface | 10/100 Mbps Ethernet (RJ-45) |
| Available PoE Power | 740W |
| Forwarding bandwidth(Gbps) | 108Gbps |
| Maximum stacking number | 8 |
| Stack Bandwidth | 80G |
| Forwarding Performance | 107.1Mpps |
| Switching bandwidth | 216Gbps |
| Maximum active VLANs | 1023 |
| MAC Address Table Size | 16K (default) |
| CPU | APM86392 600MHz dual core |
| RAM | 512 MB |
| Flash Memory | 128 MB |
| Status Indicators | ● Per-port status: Link integrity, disabled, activity, speed, and full duplex ● System status: System, RPS, PoE, Stack link status, link duplex, and link speed |
| Expansion / Connectivity | |
| Console ports | USB (Type-B), Ethernet (RJ-45) |
| Expansion Slot(s) | 1 FlexStack-Plus slot and 1 power redundant slot |
| Stack Modules | C2960X-STACK |
| Stacking cable | ● CAB-STK-E-0.5M FlexStack-Plus stacking cable with a 0.5 m length ● CAB-STK-E-1M FlexStack-Plus stacking cable with a 1.0 m length ● CAB-STK-E-3M FlexStack-Plus stacking cable with a 3.0 m length |
| Power supply | PWR-C2-250WAC |
| Power Device | Power supply – redundant – plug-in module |
| Power Redundancy | optional |
| Voltage range (Auto) | 110V-240V |
| Power Consumption Operational | 0.89kVA |
| Miscellaneous | |
| Width | 17.5 Inches (44.5 cm) |
| Depth | 16 Inches (40.8 cm) |
| Height | 1.75 Inches (4.45 cm) |
| Weight | 14.7 Pounds (6.7Kg) |
| Package Weight | 38.56 Pounds (17.49Kg) |
| Rack Mounting Kit | Optional |
| MTBF in hours | 230,860 |
| Compliant Standards | ● IEEE 802.1D Spanning Tree Protocol ● IEEE 802.1p CoS Prioritization ● IEEE 802.1Q VLAN ● IEEE 802.1s ● IEEE 802.1w ● IEEE 802.1X ● IEEE 802.1ab (LLDP) ● IEEE 802.3ad ● IEEE 802.3af and IEEE 802.3at ● IEEE 802.3ah (100BASE-X single/multimode fiber only) ● IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T ports ● IEEE 802.3 10BASE-T ● IEEE 802.3u 100BASE-TX ● IEEE 802.3ab 1000BASE-T ● IEEE 802.3z 1000BASE-X ● RMON I and II standards ● SNMP v1, v2c, and v3 ● IEEE 802.3az ● IEEE 802.3ae 10Gigabit Ethernet ● IEEE 802.1ax |
| System software / license | |
| System software | IOS IP Lite |
| license | ENERGY-MGMT, ENERGY-MGT-100-K9 |
| features | ● IP unicast routing protocols (Static, Routing Information Protocol Version 1 [RIPv1], RIPv2, RIPng, and EIGRP-Stub) ● Advanced IP unicast routing protocols (OSPF for Routed Access) ● EIGRPv3-Stub and PIMv6-Stub are supported as a part of the IPv6 routing suite. ● Equal-cost routing ● Policy-based routing (PBR) ● Hot Standby Routing Protocol (HSRP) and Virtual Router Redundancy Protocol (VRRP) ● Protocol Independent Multicast (PIM) |
| Network security | ● MAC-based VLAN assignment enables ● Cisco TrustSec uses ● Comprehensive 802.1X ● IPv6 First-Hop Security ● Device Sensor and Device Classifier ● Cisco Trust Anchor Technology ● Cisco Threat Defense ● Private VLANs ● Unicast Reverse Path Forwarding (uRPF) ● Multidomain Authentication ● Access Control Lists (ACLs) ● Switched Port Analyzer (SPAN) ● Secure Shell (SSH) Protocol, Kerberos, and Simple Network Management Protocol Version 3 (SNMPv3) ● TACACS+ and RADIUS authentication ● MAC Address Notification ● Multilevel security on console access BPDU Guard ● Spanning Tree Root Guard (STRG) ● IGMP filtering |
| Management & Troubleshooting | ● Auto-MDOX ●TDR ● UDLD ● IP SLA Responder ● layer 2 / IP Traceroute ● SPAN ● RSPAN ● Express Setup ● Device Manager ● Cisco Network Assistant ● Smartports + Advisor ● Troubleshooting Advisor ● Drag-and-drop Cisco IOS Upgrade ● IP Address DHCP ● Autoinstall with saved configuration ● Configuration Replace ● DHCP Auto Image Upgrade ● DHCP Port Based Allocation ● Error Disable MIB |
| Technical Support and Services | ● Cisco SMARTnet Service ● Cisco Smart Foundation Service ● Cisco Smart Care Service ● Cisco SP Base Service ● Cisco Focused Technical Support Services |
| Environmental Ranges | |
| Operating temperature up to 5000 ft (1500 m) | 23ºF to 113º (-5ºC to 45ºC) |
| Operating temperature up to 10,000 ft (3000 m) | 23ºF to 104ºF (-5ºC to 40ºC) |
| Short-term exception at sea level* | 23ºF to 131ºF (-5ºC to 55ºC) |
| Short-term exception up to 5000 feet (1500 m)* | 23ºF to 122ºF (-5ºC to 50ºC) |
| Short-term exception up to 10,000 feet (3000 m)* | 23ºF to 113ºF (-5ºC to 45ºC) |
| Short-term exception up to 13,000 feet (4000 m)* | 23º to 104ºF (-5ºC to 40ºC) |
| Storage temperature up to 15,000 feet (4573 m) | -13º to 158ºF (-25º to 70ºC) |
| Operating altitude | Up to 10,000 (Up to 3000 Meters) |
| Storage altitude | Up to 13,000 (Up to 4000 Meters) |
| Operating relative humidity | 10% to 95% noncondensing |
| Storage relative humidity | 10% to 95% noncondensing |
