Description
Cisco WS-C2960X-48TD-L, Catalyst 2960-X 48 GigE, 2 x 10G SFP+, LAN Base.
Linkom-PC is your source for Refurbished Cisco WS-C2960X-48TD-L. Most Cisco WS-C2960X-48TD-L are available within 3-4 days.
We make sure each item you receive is ready to use. Any configuration is reset to factory default settings in our REF process.
If you cannot find the product you are searching for, please request a quote.
WHY LINKOM-PC?
- Save 90%+ off the list
- Professional Advice
- Fully Tested
- Fast Delivery
Cisco WS-C2960X-48TD-L Technical Specifications
Dimensions & Weight | |
---|---|
Depth: | 27.9 cm |
Height: | 4.5 cm |
Weight: | 4.3 kg |
Width: | 44.5 cm |
Environmental Parameters | |
---|---|
Humidity Range Operating: | 10 – 95% (non-condensing) |
Humidity Range Storage: | 10 – 95% (non-condensing) |
Max Operating Temperature: | 45 °C |
Max Storage Temperature: | 70 °C |
Min Operating Temperature: | -5 °C |
Min Storage Temperature: | -25 °C |
Expansion / Connectivity | |
---|---|
Expansion Slots: | 1 (total) / 1 (free) x Stacking Module |
Interfaces: | 48 x 1000Base-T 10Base-T/100Base-TX/1000Base-T – RJ-45 – RJ-45 ¦ 1 x console console – RJ-45 – RJ-45 ¦ 1 x mini-USB console – mini-USB Type B – Type B management ¦ 1 x USB Type A ¦ 1 x 1000Base-TX 10Base-T/100Base-TX – RJ-45 – RJ-45 management ¦ 2 x SFP+ – SFP+ uplink |
General | |
---|---|
Authentication Method: | Kerberos, Secure Shell (SSH), RADIUS, TACACS+ |
Capacity: | Virtual interfaces (VLANs): 1023 |
Compliant Standards: | IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1ae, IEEE 802.3az, IEEE 802.1AX |
Device Type: | Switch – 48 ports – Managed – stackable |
Enclosure Type: | Desktop, rack-mountable 1U |
Features: | Layer 2 switching, DHCP support, auto-negotiation, ARP support, trunking, VLAN support, auto-uplink (auto MDI/MDI-X), IPv6 support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, RADIUS support, Jumbo Frames support, MLD snooping, Dynamic ARP Inspection (DAI), Cisco EnergyWise technology, Unicast Reverse Path Forwarding (URPF), Uni-Directional Link Detection (UDLD), Rapid Per-VLAN Spanning Tree Plus (PVRST+), IPv4 support, Shaped Round Robin (SRR), Link Aggregation Control Protocol (LACP), Remote Switch Port Analyzer (RSPAN), NetFlow, Hot Standby Router Protocol (HSRP) support, Energy Efficient Ethernet |
Flash Memory: | 128 MB |
Jumbo Frame Support: | 9216 bytes |
Max Units In A Stack: | 8 |
Performance: | Switching capacity: 216 Gbps ¦ Forwarding performance (64-byte packet size): 130.9 Mpps |
Ports: | 48 x 10/100/1000 + 2 x 10 Gigabit SFP+ |
Processor: | : 600 MHz |
RAM: | 512 MB |
Remote Management Protocol: | SNMP 1, RMON 1, RMON 2, Telnet, SNMP 3, SNMP 2c, HTTP, TFTP, SSH, CLI |
Status Indicators: | Port transmission speed, port duplex mode, system, status, link/activity |
Subtype: | Gigabit Ethernet |
Miscellaneous | |
---|---|
Compliant Standards: | CISPR 22 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, AS/NZS 60950-1, ICES-003 Class A, RoHS, FCC CFR47 Part 15, UL 60950-1 Second Edition, CSA C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, VCCI Class A, KN22, KN24, CNS 13438(95) Class A, EN 55022 Class A, EN 300 386 |
MTBF: | 445,460 hours |
Power | |
---|---|
Features: | Redundant Power System (RPS) connector |
Power Device: | Internal power supply |
Power Redundancy: | Optional |
Voltage Required: | AC 120/230 V (50/60 Hz) |
Software / System Requirements | |
---|---|
Software Included: | Cisco IOS LAN Base |