Cisco WS-C2960S-48TS-S, Catalyst 2960S 48 GigE, 2 x SFP LAN Lite

240,00

Cisco WS-C2960S-48TS-S, Catalyst 2960S 48 GigE, 2 x SFP LAN Lite.

Cisco Catalyst 2960-S Series Switches WS-C2960S-48TS-S is a model, designed for enterprise, midmarket, and branch office networks equally. It has 48 RJ-45 10/100/1000Base-T Network LAN ports and provides LAN Lite feature set.

Linkom-PC is your source for Refurbished Cisco WS-C2960S-48TS-S. Most Cisco WS-C2960S-48TS-S are available within 3-4 days.

We make sure each item you receive is ready to use. Any configuration is reset to factory default settings in our REF process.

If you cannot find the product you are searching for, please request a quote.

WHY LINKOM-PC?

  • Save 90%+ off the list
  • Professional Advice
  • Fully Tested
  • Fast Delivery

Description

Cisco WS-C2960S-48TS-S, Catalyst 2960S 48 GigE, 2 x SFP LAN Lite.

Cisco Catalyst 2960-S Series Switches WS-C2960S-48TS-S is a model, designed for enterprise, midmarket, and branch office networks equally. It has 48 RJ-45 10/100/1000Base-T Network LAN ports and provides LAN Lite feature set.

Linkom-PC is your source for Refurbished Cisco WS-C2960S-48TS-S. Most Cisco WS-C2960S-48TS-S are available within 3-4 days.

We make sure each item you receive is ready to use. Any configuration is reset to factory default settings in our REF process.

If you cannot find the product you are searching for, please request a quote.

WHY LINKOM-PC?

  • Save 90%+ off the list
  • Professional Advice
  • Fully Tested
  • Fast Delivery

Cisco WS-C2960S-48TS-S Technical Specifications

Dimensions & Weight
Depth:29.9 cm
Height:4.5 cm
Weight:4.77 kg
Width:44.5 cm
Environmental Parameters
Humidity Range Operating:10 – 95% (non-condensing)
Humidity Range Storage:10 – 95% (non-condensing)
Max Operating Temperature:40 °C
Max Storage Temperature:70 °C
Min Operating Temperature:-5 °C
Min Storage Temperature:-25 °C
Expansion / Connectivity
Interfaces:48 x 10Base-T/100Base-TX/1000Base-T – RJ-45 ¦ 2 x SFP (mini-GBIC) ¦ 1 x console – mini-USB Type B management ¦ 1 x console – RJ-45 management ¦ 1 x 10Base-T/100Base-TX – RJ-45 management ¦ 1 x USB Type A
General
Authentication Method:RADIUS, TACACS+, Secure Shell v.2 (SSH2)
Compliant Standards:IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ab (LLDP)
Device Type:Switch – 48 ports – Managed
Enclosure Type:Rack-mountable 1U
Encryption Algorithm:SSL
Features:Layer 2 switching, auto-sensing per device, DHCP support, auto-negotiation, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, DiffServ support, Broadcast Storm Control, Multicast Storm Control, Unicast Storm Control, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Quality of Service (QoS), Link Aggregation Control Protocol (LACP), Port Security, MAC Address Notification
Flash Memory:64 MB Flash
MAC Address Table Size:8K entries
Performance:Switching capacity: 50 Gbps ¦ Forwarding performance (64-byte packet size): 74.4 mpps
Ports:48 x 10/100/1000 + 2 x SFP
RAM:128 MB
Remote Management Protocol:SNMP 1, SNMP 2, RMON 1, RMON 2, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS, TFTP, SSH-2
Status Indicators:Port status, port transmission speed, port duplex mode, power, system, link/activity
Subtype:Gigabit Ethernet
Miscellaneous
Compliant Standards:TUV GS, CISPR 22 Class A, GOST, BSMI CNS 13438 Class A, CISPR 24, NOM, EN55024, CB, EMC, MIC, IEC 60950-1, EN 60950-1, UL 60950-1 Second Edition, RoHS, CSA C22.2 No. 60950-1, FCC Part 15 B Class A
MTBF:357,740 hours
Rack Mounting Kit:Optional
Power
Features:Redundant Power System (RPS) connector
Power Consumption Operational:53 Watt
Power Device:Internal power supply
Voltage Required:AC 120/230 V (50/60 Hz)
Software / System Requirements
Software Included:Cisco IOS LAN Lite

Additional information

Refurbished

Refurbished, tested, any configuration is reset to factory default settings in our REF process.