Cisco WS-C2960S-48TD-L, Catalyst 2960S 48 GigE, 2 x 10G SFP+ LAN Base

260,00

Cisco WS-C2960S-48TD-L, Catalyst 2960S 48 GigE, 2 x 10G SFP+ LAN Base.

The Cisco Catalyst 2960-S Series Switches WS-C2960S-48TD-L, similar to WS-C2960S-24TD-L but has twice ports to 48 Ethernet 10/100/1000 ports. Its 2 Ten Gigabit Ethernet SFP+ or 2 One Gigabit Ethernet SFP dual-purpose uplinks, with each dual-purpose uplink port has one port active at a time, for Gigabit Ethernet uplink flexibility, allowing use of either a copper or fiber uplink is also the distinctive function of this model, as excellent as WS-C2960S-24TD-L.

Linkom-PC is your source for Refurbished Cisco WS-C2960S-48TD-L. Most Cisco WS-C2960S-48TD-L are available within 3-4 days.

We make sure each item you receive is ready to use. Any configuration is reset to factory default settings in our REF process.

If you cannot find the product you are searching for, please request a quote.

WHY LINKOM-PC?

  • Save 90%+ off the list
  • Professional Advice
  • Fully Tested
  • Fast Delivery

Available on backorder

Description

Cisco WS-C2960S-48TD-L, Catalyst 2960S 48 GigE, 2 x 10G SFP+ LAN Base.

The Cisco Catalyst 2960-S Series Switches WS-C2960S-48TD-L, similar to WS-C2960S-24TD-L but has twice ports to 48 Ethernet 10/100/1000 ports. Its 2 Ten Gigabit Ethernet SFP+ or 2 One Gigabit Ethernet SFP dual-purpose uplinks, with each dual-purpose uplink port has one port active at a time, for Gigabit Ethernet uplink flexibility, allowing use of either a copper or fiber uplink is also the distinctive function of this model, as excellent as WS-C2960S-24TD-L.

Linkom-PC is your source for Refurbished Cisco WS-C2960S-48TD-L. Most Cisco WS-C2960S-48TD-L are available within 3-4 days.

We make sure each item you receive is ready to use. Any configuration is reset to factory default settings in our REF process.

If you cannot find the product you are searching for, please request a quote.

WHY LINKOM-PC?

  • Save 90%+ off the list
  • Professional Advice
  • Fully Tested
  • Fast Delivery

WS-C2960S-48TD-L Specification

 

WS-C2960S-48TD-L Specifications

General Information
Device TypeSwitch – 48 ports – Managed
Enclosure TypeRack-mountable – 1U
Ports48 x 10/100/1000 + 2 x 10 Gigabit SFP+
Power Over Ethernet (PoE)Yes
PerformanceSwitching capacity : 176 Gbps
Forwarding performance (64-byte packet size) : 101.2 Mpps
MAC Address Table Size8K entries
Remote Management ProtocolSNMP 1, SNMP 2, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS, TFTP, SSH
Encryption AlgorithmSSL
Authentication MethodSecure Shell (SSH), RADIUS, TACACS+
FeaturesLayer 2 switching, auto-sensing per device, dynamic IP address assignment , auto-negotiation, BOOTP support, ARP support, load balancing, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, DiffServ support, Broadcast Storm Control, IPv6 support, Multicast Storm Control, Unicast Storm Control, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Access Control List (ACL) support, Quality of Service (QoS), Link Aggregation Control Protocol (LACP), Port Security, MAC Address Notification, Remote Switch Port Analyzer (RSPAN)
Compliant StandardsIEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ab (LLDP)
RAM128 MB
Flash Memory64 MB Flash
Status IndicatorsPort status, link activity, port transmission speed, port duplex mode, power, system
Expansion / Connectivity
Interfaces48 x 10Base-T/100Base-TX/1000Base-T – RJ-45
USB : 1 x 4 PIN USB Type A
1 x console – mini-USB Type B – management
1 x console – RJ-45 – management
1 x 10Base-T/100Base-TX – RJ-45 – management
2 x SFP+
Expansion Slot(s)1 (total) / 1 (free) x Stacking Module
Power
Power DevicePower supply – internal
Voltage RequiredAC 120/230 V ( 50/60 Hz )
Power Consumption Operational55 Watt
Miscellaneous
Width17.5 in. (44.5 cm)
Depth11.8 in. (29.9 cm)
Height1.8 in. (4.5 cm)
Weight9.5 lbs (4.3 kg)
Rack Mounting KitOptional
MTBF311,291 hour(s)
Compliant StandardsTUV GS, CISPR 22 Class A, GOST, BSMI CNS 13438 Class A, CISPR 24, NOM, VCCI Class A ITE, EN55024, CB, EMC, MIC, IEC 60950-1, EN 60950-1, UL 60950-1 Second Edition, RoHS, CSA C22.2 No. 60950-1, FCC Part 15 B Class A
Software / System Requirements
Software IncludedCisco IOS LAN Base
Service & SupportLimited lifetime warranty
Service & Support DetailsLimited warranty – replacement – lifetime – response time: next business day
Limited warranty – power supply and fans – 5 years
New releases update
Environmental Parameters
Min Operating Temperature23 °F (-5 °C)
Max Operating Temperature104 °F (40 °C)
Humidity Range Operating10 – 95% (non-condensing)
Min Storage Temperature-13 °F (-25 °C)
Max Storage Temperature158 °F (70 °C)
Humidity Range Storage10 – 95% (non-condensing)

Additional information

Refurbished

Refurbished, tested, any configuration is reset to factory default settings in our REF process.

You may also like…

  • Cisco WS-C2960X-48FPS-L, Catalyst 2960-X 48 GigE PoE 740W, 4 x 1G SFP, LAN Base

    370,00