Description
Cisco WS-C2960+24LC-L, Catalyst 2960 Plus 24 10/100 (8 PoE) + 2 T/SFP LAN Base.
The Cisco Catalyst 2960-Plus Series Switches are fixed-configuration Fast Ethernet switches (Figure 1) that provide enterprise-class Layer 2 switching for branch offices, conventional workspaces, and infrastructure applications. They enable reliable and secure operations with lower total cost of ownership through a range of Cisco IOS software features, including Cisco Catalyst SmartOperations.
Linkom-PC is your source for Refurbished Cisco WS-C2960+24LC-L. Most Cisco WS-C2960+24LC-L are available within 3-4 days.
We make sure each item you receive is ready to use. Any configuration is reset to factory default settings in our REF process.
If you cannot find the product you are searching for, please request a quote.
WHY LINKOM-PC?
- Save 90%+ off the list
- Professional Advice
- Fully Tested
- Fast Delivery
Cisco WS-C2960+24LC-L Technical Specifications
| Dimensions & Weight | |
|---|---|
| Depth: | 33.2 cm |
| Height: | 4.4 cm |
| Weight: | 4.5 kg |
| Width: | 45 cm |
| Environmental Parameters | |
|---|---|
| Humidity Range Operating: | 10 – 95% (non-condensing) |
| Humidity Range Storage: | 10 – 95% (non-condensing) |
| Max Operating Temperature: | 40 °C |
| Max Storage Temperature: | 70 °C |
| Min Operating Temperature: | -5 °C |
| Min Storage Temperature: | -25 °C |
| Expansion / Connectivity | |
|---|---|
| Interfaces: | 8 x 100Base-TX RJ-45 PoE – 15.4 W ¦ 16 x 100Base-TX RJ-45 ¦ 2 x 1000Base-T RJ-45 ¦ 2 x SFP (mini-GBIC) |
| General | |
|---|---|
| Authentication Method: | RADIUS, TACACS+ |
| Capacity: | Active VLANs: 64 |
| Compliant Standards: | IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ab (LLDP) |
| Device Type: | Switch – 24 ports – Managed |
| Enclosure Type: | Rack-mountable 1U |
| Features: | Layer 2 switching, auto-sensing per device, dynamic IP address assignment, DHCP support, power over Ethernet (PoE), auto-negotiation, BOOTP support, ARP support, load balancing, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, DiffServ support, Broadcast Storm Control, IPv6 support, Multicast Storm Control, Unicast Storm Control, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Access Control List (ACL) support, Quality of Service (QoS), Link Aggregation Control Protocol (LACP), Port Security, MAC Address Notification, Remote Switch Port Analyzer (RSPAN) |
| Flash Memory: | 64 MB |
| Jumbo Frame Support: | 9018 bytes |
| Performance: | Switching capacity: 16 Gbps ¦ Forwarding performance (64-byte packet size): 6.5 Mpps |
| PoE Budget: | 123 W |
| Ports: | 16 x 10/100 + 8 x 10/100 (PoE) + 2 x combo Gigabit SFP |
| Power Over Ethernet (PoE): | PoE |
| RAM: | 128 MB |
| Remote Management Protocol: | SNMP 1, RMON 1, RMON 2, Telnet, SNMP 3, SNMP 2c, HTTP, TFTP |
| Status Indicators: | Port status, port transmission speed, port duplex mode, power, system, link/activity |
| Subtype: | Fast Ethernet |
| Miscellaneous | |
|---|---|
| Compliant Standards: | FCC Class A certified, CISPR 22 Class A, BSMI CNS 13438 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, EN55022 Class A, AS/NZS 60950-1, ICES-003 Class A, RoHS, FCC CFR47 Part 15, UL 60950-1 Second Edition, CSA C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, VCCI Class A, KN22, KN24, EN 300 386 |
| Pricing Type: | Refurbished |
| Rack Mounting Kit: | Optional |
| Power | |
|---|---|
| Features: | Redundant Power System (RPS) connector |
| Power Device: | Internal power supply |
| Voltage Required: | AC 120/230 V (50/60 Hz) |
| Software / System Requirements | |
|---|---|
| Software Included: | Cisco LAN Base software |
