Description
Cisco N3K-C3064TQ-10GT, Nexus 3064-T, 48 x 10GBase-T and 4 QSFP+ ports.
Linkom-PC is your source for Refurbished Cisco N3K-C3064TQ-10GT. Most Cisco N3K-C3064TQ-10GT are available within 3-4 days.
We make sure each item you receive is ready to use. Any configuration is reset to factory default settings in our REF process.
If you cannot find the product you are searching for, please request a quote.
WHY LINKOM-PC?
- Save 90%+ off the list
- Professional Advice
- Fully Tested
- Fast Delivery
Cisco N3K-C3064TQ-10GT Technical Specifications
| Product Code | N3K-C3064TQ-10GT |
| Physical | ● 1RU fixed form factor ● Cisco Nexus 3064-T: 64 x 10 Gigabit Ethernet ports (48 10GBASE-T and 4 QSFP+) ◦ 48 RJ-45 ports support 100 Mbps and 1 and 10 Gigabit Ethernet ◦ 4 QSFP ports support 4 x 10 Gigabit Ethernet or 40 Gigabit Ethernet each ● 2 redundant power supplies ● 1fan tray with redundant fans ● 1 I/O module with management, console, and USB flash memory ports |
| Performance | ● 1.28-Tbps switching capacity ● Forwarding rate of 950 mpps ● Line-rate traffic throughput (both Layer 2 and 3) on all ports ● Configurable maximum transmission units (MTUs) of up to 9216 bytes (jumbo frames) |
| Physical dimensions (H x W x D) | 1.72 x 17.3 x 22.45 in.(4.4 x 43.9 x 57.0 cm) |
| Weight | 20.8 lb (9.5 kg) |
Product Details
The Cisco Nexus 3064 switches provides the following main benefits:
● Wire-rate Layer 2 and 3 switching on all ports
◦ The Cisco Nexus 3064 switches provide Layer 2 and 3 switching of up to 1.2 terabits per second (Tbps) and more than 950 million packets per second (mpps) in a compact 1RU form factor.
● Ultra-low latency
◦ The Cisco Nexus 3064 switches deliver ultra-low nominal latency that allows customers to implement high‑performance infrastructure for high-frequency trading (HFT) workloads.
● Purpose-built on Cisco NX-OS operating system with comprehensive, proven innovations
◦ Virtual PortChannel (vPC) provides Layer 2 multipathing through the elimination of Spanning Tree Protocol and enables fully utilized bisectional bandwidth and simplified Layer 2 logical topologies without the need to change the existing management and deployment models.
◦ PowerOn Auto Provisioning (POAP) enables touchless bootup and configuration of the switch, drastically reducing provisioning time.
◦ Cisco Embedded Event Manager (EEM) and Python scripting enable automation and remote operations in the data center.
◦ Advanced buffer monitoring reports real-time buffer use per port and per queue, which allows organizations to monitor traffic bursts and application traffic patterns.
◦ The 64-way equal-cost multipath (ECMP) routing enables Layer 3 fat tree designs and allows organizations to prevent network bottlenecks, increase resiliency, and add capacity with little network disruption.
◦ EtherAnalyzer is a built-in packet analyzer for monitoring and troubleshooting control-plane traffic and is based on the popular Wireshark open source network protocol analyzer.
◦ Precision Time Protocol (PTP; IEEE 1588) provides accurate clock synchronization and improved data correlation with network captures and system events.
◦ Full Layer 3 unicast and multicast routing protocol suites are supported, including Border Gateway Protocol (BGP), Open Shortest Path First (OSPF), Enhanced Interior Gateway Routing Protocol (EIGRP), Routing Information Protocol Version 2 (RIPv2), Protocol Independent Multicast sparse mode (PIM-SM), Source-Specific Multicast (SSM), and Multicast Source Discovery Protocol (MSDP).
● Network traffic monitoring with Cisco Nexus Data Broker
◦ Build simple, scalable and cost-effective network tap or Cisco Switched Port Analyzer (SPAN) aggregation for network traffic monitoring and analysis.
