Cisco CISCO887VW-GNE-K9, Cisco 887V VDSL2 Sec Router w/ 802.11n AP – ETSI

390,00

Cisco 887V VDSL2 Sec Router w/ 802.11n AP – ETSI

Available on backorder

Description

Cisco CISCO887VW-GNE-K9, Cisco 887V VDSL2 Sec Router w/ 802.11n AP – ETSI.

Linkom-PC is your source for Refurbished Cisco CISCO887VW-GNE-K9. Most Cisco CISCO887VW-GNE-K9 are available within 3-4 days.

We make sure each item you receive is ready to use. Any configuration is reset to factory default settings in our REF process.

If you cannot find the product you are searching for, please request a quote.

WHY LINKOM-PC?

  • Save 90%+ off the list
  • Professional Advice
  • Fully Tested
  • Fast Delivery

Cisco CISCO887VW-GNE-K9 Technical Specifications

Aerial
Aerial:External detachable
Antenna Qty:3
Directivity:Omni-directional
Gain Level:2 dBi
Communications
Digital Signaling Protocol:VDSL2
Type:ISDN / DSL modem combo
Dimensions & Weight
Depth:24.9 cm
Height:4.4 cm
Width:32.5 cm
Environmental Parameters
Humidity Range Operating:10 – 85%
Max Operating Temperature:40 °C
Min Operating Temperature:0 °C
Expansion / Connectivity
Expansion Slots:1 (total) / 1 (free) x ExpressCard ¦ 1 (total) / 1 (free) x SO-DIMM 200-pin
Interfaces:LAN: 4 x 10Base-T/100Base-TX – RJ-45 ¦ Management: 1 x RJ-45 ¦ WAN: 1 x VDSL2 ¦ USB: 1 x 4 pin USB Type A ¦ WAN: 1 x BRI ST
General
Authentication Method:RADIUS, TACACS+
Capacity:IPSec VPN tunnels: 20
Compliant Standards:IEEE 802.1D, IEEE 802.1Q, IEEE 802.11b, IEEE 802.11g, Wi-Fi CERTIFIED, IEEE 802.11n (draft 2.0), ETSI, VCCI-II, EN55024, CSA 22.2 No. 60950, EN55022 Class B, AS/NZ 3548 Class B, AS/NZS 60950-1, CS-03, EN 60555-2, UL 60950-1, IEC 60950-1
Connectivity Technology:Wireless, wired
Data Link Protocol:Ethernet, Fast Ethernet, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n (draft 2.0)
Device Type:Wireless router – 4-port switch (integrated)
Enclosure Type:Desktop
Encryption Algorithm:DES, Triple DES, SSL, PKI, 128-bit AES, 192-bit AES, 256-bit AES
Features:Firewall protection, DHCP support, NAT support, VLAN support, auto-uplink (auto MDI/MDI-X), Stateful Packet Inspection (SPI), MAC address filtering, Broadcast Storm Control, Low-latency queuing (LLQ), Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), Access Control List (ACL) support, Quality of Service (QoS), DHCP server, DNS proxy
Flash Memory:128 MB
Frequency Band:2.4 GHz
Network / Transport Protocol:L2TP, IPSec, PPPoE, PPPoA
RAM:256 MB (installed) / 768 MB (max) – DDR2 SDRAM – SO-DIMM 200-pin
Remote Management Protocol:Telnet, SNMP 3, HTTP, HTTPS, SSH
Routing Protocol:RIP-1, RIP-2, HSRP, VRRP, GRE
Status Indicators:Port status, power
Power
Power Device:External power adapter – 60 Watt
Voltage Required:AC 120/230 V (50/60 Hz)
Software / System Requirements
OS Provided:Cisco IOS Advanced Security

Additional information

Refurbished

Refurbished, tested, any configuration is reset to factory default settings in our REF process.