Description
Cisco CISCO887GW-GN-E-K9, Cisco 887 ADSL2/2+ Annex A Router w/ 3G 802.11n ETSI Comp.
Linkom-PC is your source for Refurbished Cisco CISCO887GW-GN-E-K9. Most Cisco CISCO887GW-GN-E-K9 are available within 3-4 days.
We make sure each item you receive is ready to use. Any configuration is reset to factory default settings in our REF process.
If you cannot find the product you are searching for, please request a quote.
WHY LINKOM-PC?
- Save 90%+ off the list
- Professional Advice
- Fully Tested
- Fast Delivery
Cisco CISCO887GW-GN-E-K9 Technical Specifications
| Aerial | |
|---|---|
| Aerial: | External detachable |
| Antenna Qty: | 3 |
| Directivity: | Omni-directional |
| Gain Level: | 2 dBi |
| Communications | |
|---|---|
| Digital Signaling Protocol: | ADSL2, ADSL2+ |
| Protocols & Specifications: | ITU G.992.1 (G.DMT) Annex A, ITU G.992.3 Annex A, ITU G.992.5 Annex A |
| Type: | DSL modem / wireless cellular modem |
| Dimensions & Weight | |
|---|---|
| Depth: | 26.4 cm |
| Height: | 4.4 cm |
| Width: | 32.5 cm |
| Environmental Parameters | |
|---|---|
| Humidity Range Operating: | 10 – 85% |
| Max Operating Temperature: | 40 °C |
| Min Operating Temperature: | 0 °C |
| Expansion / Connectivity | |
|---|---|
| Expansion Slots: | 1 (total) / 1 (free) x ExpressCard ¦ 1 (total) / 1 (free) x memory |
| Interfaces: | LAN: 4 x 10Base-T/100Base-TX – RJ-45 ¦ Management: 1 x RJ-45 ¦ WAN: 1 x ADSL2+ ¦ USB: 1 x 4 pin USB Type A ¦ WAN: 1 x BRI ST – RJ-45 ¦ WAN: 1 x |
| General | |
|---|---|
| Authentication Method: | RADIUS, TACACS+ |
| Capacity: | IPSec VPN tunnels: 20 |
| Compliant Standards: | IEEE 802.1D, IEEE 802.1Q, IEEE 802.11b, IEEE 802.11g, Wi-Fi CERTIFIED, IEEE 802.11n (draft 2.0), ETSI, VCCI-II, EN55024, CSA 22.2 No. 60950, EN55022 Class B, AS/NZ 3548 Class B, AS/NZS 60950-1, CS-03, EN 60555-2, UL 60950-1, IEC 60950-1 |
| Connectivity Technology: | Wireless, wired |
| Data Link Protocol: | Ethernet, Fast Ethernet, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n (draft 2.0) |
| Device Type: | Wireless router – 4-port switch (integrated) |
| Enclosure Type: | Desktop |
| Encryption Algorithm: | LEAP, DES, Triple DES, MD5, TLS, PEAP, TTLS, TKIP, WPA, WPA2, WPA-PSK, PKI, 128-bit AES, 192-bit AES, 256-bit AES |
| Features: | Firewall protection, DHCP support, NAT support, VLAN support, auto-uplink (auto MDI/MDI-X), Stateful Packet Inspection (SPI), MAC address filtering, Broadcast Storm Control, Low-latency queuing (LLQ), Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), Access Control List (ACL) support, Quality of Service (QoS), DHCP server, DNS proxy |
| Flash Memory: | 128 MB |
| Network / Transport Protocol: | L2TP, IPSec, PPPoE, PPPoA |
| RAM: | 256 MB (installed) / 768 MB (max) |
| Remote Management Protocol: | Telnet, SNMP 3, HTTP, HTTPS, SSH |
| Routing Protocol: | RIP-1, RIP-2, HSRP, VRRP, GRE |
| Status Indicators: | Port status, power |
| Power | |
|---|---|
| Power Device: | External power adapter – 60 Watt |
| Voltage Required: | AC 120/230 V (50/60 Hz) |
| Software / System Requirements | |
|---|---|
| OS Provided: | Cisco IOS Advanced Security |
