Description

Cisco CISCO857-K9, ADSL SOHO Security Router.

Linkom-PC is your source for Refurbished Cisco CISCO857-K9. Most Cisco CISCO857-K9 are available within 3-4 days.

We make sure each item you receive is ready to use. Any configuration is reset to factory default settings in our REF process.

If you cannot find the product you are searching for, please request a quote.

WHY LINKOM-PC?

  • Save 90%+ off the list
  • Professional Advice
  • Fully Tested
  • Fast Delivery

Cisco CISCO857-K9 Technical Specifications

Communications
Digital Signaling Protocol:ADSL, ADSL2, ADSL2+
Protocols & Specifications:ITU G.992.1 (G.DMT), ITU G.992.3 (G.DMT.bis), ITU G.992.5
Type:DSL modem
Dimensions & Weight
Depth:21.6 cm
Height:5.1 cm
Weight:1 kg
Width:26 cm
Environmental Parameters
Humidity Range Operating:10 – 85%
Max Operating Temperature:40 °C
Min Operating Temperature:0 °C
Expansion / Connectivity
Interfaces:LAN: 4 x 10Base-T/100Base-TX – RJ-45 ¦ WAN: 1 x ADSL – RJ-11 ¦ Management: 1 x console – RJ-45
General
Authentication Method:RADIUS, TACACS+
Capacity:VPN tunnels: 5
Compliant Standards:IEEE 802.1D, IEEE 802.1x, Wi-Fi CERTIFIED, ETSI, EN 60950, IEC 61000-4-11, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-8, IEC950, VCCI-II, EN55022 Class B, ICES-003 Class B, ACA TS001, AS/NZS 3260, FCC Part 68, CS-03, UL 1950 Third Edition, EN 60555-2, FCC CFR47 Part 15
Connectivity Technology:Wired
Data Link Protocol:Ethernet, Fast Ethernet
Device Type:Router – 4-port switch (integrated)
Enclosure Type:Desktop
Encryption Algorithm:DES, Triple DES, AES
Features:Firewall protection, auto-sensing per device, NAT support, hardware encryption, VPN support, PAT support, auto-uplink (auto MDI/MDI-X), traffic shaping, IPv6 support, firmware upgradable, Weighted Fair Queuing (WFQ), event log, Access Control List (ACL) support, Quality of Service (QoS), DHCP server
Flash Memory:20 MB (installed) / 20 MB (max)
Network / Transport Protocol:PPTP, L2TP, IPSec, PPPoE, PPPoA
RAM:64 MB (installed) / 64 MB (max)
Remote Management Protocol:SNMP, RMON, Telnet, HTTP
Routing Protocol:RIP-1, RIP-2, GRE
Status Indicators:Status
Line Properties
Framing Format:ANSI T1.413
Power
Power Device:External power adapter
Voltage Required:AC 120/230 V (50/60 Hz)

Additional information

Refurbished

Refurbished, tested, any configuration is reset to factory default settings in our REF process.