Description

Cisco CISCO851-K9, Ethernet SOHO Security Router.

Linkom-PC is your source for Refurbished Cisco CISCO851-K9. Most Cisco CISCO851-K9 are available within 3-4 days.

We make sure each item you receive is ready to use. Any configuration is reset to factory default settings in our REF process.

If you cannot find the product you are searching for, please request a quote.

WHY LINKOM-PC?

  • Save 90%+ off the list
  • Professional Advice
  • Fully Tested
  • Fast Delivery

Cisco CISCO851-K9 Technical Specifications

Dimensions & Weight
Depth:21.6 cm
Height:5.1 cm
Weight:1 kg
Width:26 cm
Environmental Parameters
Humidity Range Operating:10 – 85%
Max Operating Temperature:40 °C
Min Operating Temperature:0 °C
Expansion / Connectivity
Interfaces:LAN: 4 x 10Base-T/100Base-TX – RJ-45 ¦ WAN: 1 x 10Base-T/100Base-TX – RJ-45 ¦ Management: 1 x console – RJ-45
General
Authentication Method:RADIUS, TACACS+
Compliant Standards:IEEE 802.1D, IEEE 802.1x, ETSI, EN 60950, IEC 61000-4-11, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-8, IEC950, VCCI-II, EN55022 Class B, ICES-003 Class B, ACA TS001, AS/NZS 3260, FCC Part 68, CS-03, UL 1950 Third Edition, EN 60555-2, FCC CFR47 Part 15
Connectivity Technology:Wired
Data Link Protocol:Ethernet, Fast Ethernet
Device Type:Router – 4-port switch (integrated)
Enclosure Type:Desktop
Encryption Algorithm:DES, Triple DES, AES
Features:Firewall protection, auto-sensing per device, DHCP support, NAT support, hardware encryption, VPN support, PAT support, auto-uplink (auto MDI/MDI-X), traffic shaping, IPv6 support, Weighted Fair Queuing (WFQ), Access Control List (ACL) support
Flash Memory:20 MB (installed) / 20 MB (max)
Network / Transport Protocol:PPTP, L2TP, IPSec, PPPoE
RAM:64 MB (installed) / 64 MB (max)
Remote Management Protocol:SNMP, RMON, Telnet, HTTP
Routing Protocol:RIP-1, RIP-2, GRE
Status Indicators:Status
Power
Power Device:External power adapter
Voltage Required:AC 120/230 V (50/60 Hz)

Additional information

Refurbished

Refurbished, tested, any configuration is reset to factory default settings in our REF process.