Cisco CISCO831-K9-64, Cisco 831 Ethernet Router-64MB

175,00

Cisco 831 Ethernet Router-64MB

Available on backorder

Description

Cisco CISCO831-K9-64, Cisco 831 Ethernet Router-64MB.

Linkom-PC is your source for Refurbished Cisco CISCO831-K9-64. Most Cisco CISCO831-K9-64 are available within 3-4 days.

We make sure each item you receive is ready to use. Any configuration is reset to factory default settings in our REF process.

If you cannot find the product you are searching for, please request a quote.

WHY LINKOM-PC?

  • Save 90%+ off the list
  • Professional Advice
  • Fully Tested
  • Fast Delivery

Cisco CISCO831-K9-64 Technical Specifications

Dimensions & Weight
Depth:21.6 cm
Height:5.1 cm
Weight:0.7 kg
Width:24.6 cm
Environmental Parameters
Humidity Range Operating:10 – 85%
Max Operating Temperature:40 °C
Min Operating Temperature:0 °C
Expansion / Connectivity
Interfaces:LAN: 4 x 10Base-T/100Base-TX – RJ-45 ¦ WAN: 1 x 10Base-T – RJ-45 ¦ Management: 1 x console – RJ-45
General
Authentication Method:Secure Shell (SSH), RADIUS, PAP, CHAP, TACACS+
Compliant Standards:ETSI, EN 60950, IEC950, VCCI-II, EN55022 Class B, ICES-003 Class B, AS/NZS 3260, FCC Part 68, CS-03, UL 1950 Third Edition, CSA 22.2 No. 950 Third Edition
Connectivity Technology:Wired
Data Link Protocol:Ethernet, Fast Ethernet
Data Transfer Rate:100 Mbps
Device Type:Router – 4-port switch (integrated)
Enclosure Type:Desktop
Encryption Algorithm:DES, Triple DES, MD5, IKE, SHA-1
Features:Firewall protection, DHCP support, NAT support, VPN support, PAT support, Syslog support, DoS attack prevention
Flash Memory:12 MB (installed) / 24 MB (max)
Network / Transport Protocol:PPTP, IPSec, PPPoE
Processor:Motorola
RAM:64 MB (installed) / 80 MB (max)
Remote Management Protocol:SNMP, Telnet
Routing Protocol:OSPF, IGRP, RIP-1, RIP-2, BGP, EIGRP
Status Indicators:Port status, power, link OK, transmit, receive
Power
Power Device:External power adapter
Voltage Required:AC 120/230 V (50/60 Hz)

Additional information

Refurbished

Refurbished, tested, any configuration is reset to factory default settings in our REF process.