Cisco CISCO1841-SHDSL, 1841 G.shdsl 2-wire Bdle,IP Broadband,32FL/128DR

370,00

1841 G.shdsl 2-wire Bdle,IP Broadband,32FL/128DR

Available on backorder

Description

Cisco CISCO1841-SHDSL, 1841 G.shdsl 2-wire Bdle,IP Broadband,32FL/128DR.

Linkom-PC is your source for Refurbished Cisco CISCO1841-SHDSL. Most Cisco CISCO1841-SHDSL are available within 3-4 days.

We make sure each item you receive is ready to use. Any configuration is reset to factory default settings in our REF process.

If you cannot find the product you are searching for, please request a quote.

WHY LINKOM-PC?

  • Save 90%+ off the list
  • Professional Advice
  • Fully Tested
  • Fast Delivery

Cisco CISCO1841-SHDSL Technical Specifications

Communications
Digital Signaling Protocol:SHDSL
Protocols & Specifications:ITU G.991.2 (G.shdsl)
Type:DSL modem
Dimensions & Weight
Depth:27.4 cm
Height:4.75 cm
Width:34.3 cm
Environmental Parameters
Humidity Range Operating:10 – 85%
Max Operating Temperature:40 °C
Min Operating Temperature:0 °C
Expansion / Connectivity
Expansion Slots:1 CompactFlash ¦ Memory ¦ 2 HWIC ¦ 1 AIM
Interfaces:2 x 10Base-T/100Base-TX – RJ-45 ¦ USB: 1 x ¦ Management: 1 x console ¦ Serial: 1 x auxiliary ¦ WAN: 1 x SHDSL
General
Compliant Standards:CSA, CTR 21, CISPR 22 Class A, CISPR 24, EN 60950, EN 61000-3-2, EN 61000-3-3, EN55024, EN55022 Class A, UL 60950, EN50082-1, EN 61000-4-4, EN 61000-4-2, EN 61000-4-3, EN 61000-4-6, CS-03, EN 61000-4-5
Connectivity Technology:Wired
Data Link Protocol:Ethernet, Fast Ethernet
Device Type:Router
Enclosure Type:Desktop – modular – 1U
Encryption Algorithm:DES, Triple DES, AES
Features:Firewall protection, hardware encryption, VPN support, URL filtering
Flash Memory:32 MB (installed) / 128 MB (max)
Network / Transport Protocol:IPSec
RAM:128 MB (installed) / 384 MB (max)
Remote Management Protocol:SNMP
IP Telephony
Voice Codecs:G.723, G.728, G.729, G.729a, G.726
Power
Power Device:Internal power supply
Voltage Required:AC 120/230 V (50/60 Hz)
Software / System Requirements
OS Provided:Cisco IOS 12.3(8)T

Additional information

Refurbished

Refurbished, tested, any configuration is reset to factory default settings in our REF process.