Cisco C881W-E-K9, Cisco 881 Eth Sec Router with 802.11n ETSI Compliant

180,00

Cisco C881W-E-K9, Cisco 881 Eth Sec Router with 802.11n ETSI Compliant. 

Linkom-PC is your source for Refurbished Cisco C881W-E-K9. Most Cisco C881W-E-K9 are available within 3-4 days.

We make sure each item you receive is ready to use. Any configuration is reset to factory default settings in our REF process.

If you cannot find the product you are searching for, please request a quote.

WHY LINKOM-PC?

  • Save 90%+ off the list
  • Professional Advice
  • Fully Tested
  • Fast Delivery

Description

Cisco C881W-E-K9, Cisco 881 Eth Sec Router with 802.11n ETSI Compliant. 

Linkom-PC is your source for Refurbished Cisco C881W-E-K9. Most Cisco C881W-E-K9 are available within 3-4 days.

We make sure each item you receive is ready to use. Any configuration is reset to factory default settings in our REF process.

If you cannot find the product you are searching for, please request a quote.

WHY LINKOM-PC?

  • Save 90%+ off the list
  • Professional Advice
  • Fully Tested
  • Fast Delivery

Cisco C881W-E-K9 Technical Specifications

Dimensions & Weight
Depth:26.4 cm
Height:4.4 cm
Weight:2.5 kg
Width:32.5 cm
Environmental Parameters
Humidity Range Operating:10 – 85% (non-condensing)
Max Operating Temperature:40 °C
Min Operating Temperature:0 °C
Expansion / Connectivity
Interfaces:LAN: 4 x 10Base-T/100Base-TX – RJ-45 ¦ WAN: 1 x 10Base-T/100Base-TX – RJ-45 ¦ Management: 1 x console – RJ-45 ¦ USB: 1 x 4 pin USB Type A
General
Authentication Method:RADIUS, TACACS+
Capacity:IPSec VPN tunnels: 20
Compliant Standards:IEEE 802.1D, IEEE 802.1Q, IEEE 802.11b, IEEE 802.11g, IEEE 802.1x, IEEE 802.11i, IEEE 802.3ah, Wi-Fi CERTIFIED, IEEE 802.1ag, IEEE 802.11n (draft 2.0), ETSI, VCCI-II, EN55024, CSA 22.2 No. 60950, EN55022 Class B, AS/NZ 3548 Class B, AS/NZS 60950-1, EN 60555-2, UL 60950-1, IEC 60950-1
Connectivity Technology:Wireless, wired
Data Link Protocol:Ethernet, Fast Ethernet, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n (draft 2.0)
Device Type:Wireless router – 4-port switch (integrated)
Enclosure Type:Desktop
Encryption Algorithm:LEAP, DES, Triple DES, MD5, TLS, PEAP, TTLS, TKIP, WPA, WPA2, WPA-PSK, PKI, 128-bit AES, 192-bit AES, 256-bit AES
Features:NAT support, VPN support, load balancing, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, traffic shaping, Stateful Packet Inspection (SPI), content filtering, DiffServ support, MAC address filtering, IPv6 support, High Availability, Intrusion Prevention System (IPS), URL filtering, Stateful Failover, Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), MIMO technology, Spanning Tree Protocol (STP) support, Wi-Fi Multimedia (WMM) support, Access Control List (ACL) support, Quality of Service (QoS), Link Fragmentation and Interleaving (LFI), Dynamic Multipoint VPN (DMVPN), WAN failover, DHCP server, Virtual Route Forwarding-Lite (VRF-Lite), DNS proxy, Bidirectional Forwarding Detection (BFD), security lock slot (cable lock sold separately)
Flash Memory:128 MB
Frequency Band:2.4 GHz
Network / Transport Protocol:L2TP, RSVP, IPSec, PPPoE, PPPoA, FTP, DHCP, DNS, L2TPv3, DDNS
RAM:512 MB (installed) / 1024 MB (max) – DDR2 SDRAM – SO-DIMM 200-pin
Remote Management Protocol:Telnet, SNMP 3, HTTP, HTTPS, SSH
Routing Protocol:OSPF, RIP-1, RIP-2, BGP, EIGRP, HSRP, VRRP, NHRP, PIM-SM, GRE, policy-based routing (PBR), WCCP
Status Indicators:Port status, power
Power
Power Device:External power adapter – 60 Watt
Voltage Required:AC 120/230 V (50/60 Hz)
Software / System Requirements
OS Provided:Cisco IOS Advanced IP services

Additional information

Refurbished

Refurbished, tested, any configuration is reset to factory default settings in our REF process.