Sale!

Cisco WS-C4948-10GE-S, Cat4948.IPB SW.48 10/100/1000+2 10GE(X2)AC PS

272,00

Cisco WS-C4948-10GE-S, Cat4948.IPB SW.48 10/100/1000+2 10GE(X2)AC PS.

The Cisco Catalyst 4948-10GE delivers wire-speed throughput with low latency for data-intensive applications using a 136-Gbps switching fabric with a 102-million packets per second (mpps) forwarding rate in hardware for Layer 2-4 traffic. High-performance switching is delivered regardless of the number of route entries or Layer 3 and 4 services enabled. Hardware-based Cisco Express Forwarding routing architecture allows for increased scalability and performance. X2 10 Gigabit Ethernet optics provide 20 Gigabit Ethernet wire-speed uplinks for maximum throughput of traffic.

Linkom-PC is your source for Refurbished Cisco WS-C4948-10GE-S. Most Cisco WS-C4948-10GE-S are available within 3-4 days.

We make sure each item you receive is ready to use. Any configuration is reset to factory default settings in our REF process.

If you cannot find the product you are searching for, please request a quote.

WHY LINKOM-PC?

  • Save 90%+ off the list
  • Professional Advice
  • Fully Tested
  • Fast Delivery

Cisco WS-C4948-10GE-S, Cat4948.IPB SW.48 10/100/1000+2 10GE(X2)AC PS.

The Cisco Catalyst 4948-10GE delivers wire-speed throughput with low latency for data-intensive applications using a 136-Gbps switching fabric with a 102-million packets per second (mpps) forwarding rate in hardware for Layer 2-4 traffic. High-performance switching is delivered regardless of the number of route entries or Layer 3 and 4 services enabled. Hardware-based Cisco Express Forwarding routing architecture allows for increased scalability and performance. X2 10 Gigabit Ethernet optics provide 20 Gigabit Ethernet wire-speed uplinks for maximum throughput of traffic.

Linkom-PC is your source for Refurbished Cisco WS-C4948-10GE-S. Most Cisco WS-C4948-10GE-S are available within 3-4 days.

We make sure each item you receive is ready to use. Any configuration is reset to factory default settings in our REF process.

If you cannot find the product you are searching for, please request a quote.

WHY LINKOM-PC?

  • Save 90%+ off the list
  • Professional Advice
  • Fully Tested
  • Fast Delivery

Cisco WS-C4948-10GE-S Technical Specifications

Dimensions & Weight
Depth:41 cm
Height:4.4 cm
Weight:7.5 kg
Width:43.9 cm
Environmental Parameters
Humidity Range Operating:10 – 90%
Max Operating Temperature:40 °C
Min Operating Temperature:0 °C
Expansion / Connectivity
Interfaces:1 x console RJ-45 management ¦ 1 x 100Base-TX RJ-45 management ¦ 48 x 1000Base-T RJ-45 ¦ 2 x X2
General
Authentication Method:Secure Shell (SSH), RADIUS, TACACS+, Secure Shell v.2 (SSH2)
Compliant Standards:IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s
Device Type:Switch – 48 ports – L4 – Managed
Enclosure Type:Rack-mountable 1U
Features:Layer 4 switching, Layer 3 switching, Layer 2 switching, auto-sensing per device, DHCP support, auto-negotiation, BOOTP support, ARP support, trunking, Cisco Fast EtherChannel, VLAN support, Cisco Gigabit EtherChannel, IGMP snooping, Broadcast Storm Control
Ports:48 x 10/100/1000 + 2 x X2
Processor:1: 666 MHz
RAM:256 MB SDRAM
Remote Management Protocol:SNMP 1, SNMP 2, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, HTTPS
Routing Protocol:RIP-1, RIP-2, EIGRP, static IP routing
Status Indicators:Link OK, status, link/activity
Subtype:Gigabit Ethernet
Miscellaneous
Compliant Standards:NEBS level 3, FCC Class A certified, ETSI, CISPR 22 Class A, EN 60950, EN 61000-3-2, VCCI Class A ITE, IEC 60950, EN 61000-3-3, EN55024, EN55022 Class A, UL 60950, AS/NZ 3548 Class A, FCC Part 15, ICES-003 Class A
Pricing Type:Refurbished
Power
Installed Qty:1 (installed) / 2 (max)
Power Device:Internal power supply – hot-plug
Power Redundancy:Yes
Voltage Required:AC 120/230 V (50/60 Hz)
Software / System Requirements
Software Included:Standard Multilayer Software Image (SMI)

Additional information

Refurbished

Refurbished, tested, any configuration is reset to factory default settings in our REF process.