Description
Cisco WS-C3750V2-48TS-S, Catalyst 3750V2 48 10/100 + 4 SFP Standard Image.
Linkom-PC is your source for Refurbished Cisco WS-C3750V2-48TS-S. Most Cisco WS-C3750V2-48TS-S are available within 3-4 days.
We make sure each item you receive is ready to use. Any configuration is reset to factory default settings in our REF process.
If you cannot find the product you are searching for, please request a quote.
WHY LINKOM-PC?
- Save 90%+ off the list
- Professional Advice
- Fully Tested
- Fast Delivery
Cisco WS-C3750V2-48TS-S Technical Specifications
Dimensions & Weight | |
---|---|
Depth: | 29.5 cm |
Height: | 4.4 cm |
Weight: | 4.2 kg |
Width: | 44.3 cm |
Environmental Parameters | |
---|---|
Max Operating Temperature: | 45 °C |
Min Operating Temperature: | 0 °C |
Expansion / Connectivity | |
---|---|
Interfaces: | 48 x 10Base-T/100Base-TX – RJ-45 ¦ 1 x console – RJ-45 management ¦ 1 x network stack device x 2 ¦ 4 x SFP (mini-GBIC) |
General | |
---|---|
Authentication Method: | Kerberos, RADIUS, TACACS+, Secure Shell v.2 (SSH2) |
Compliant Standards: | IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s |
Device Type: | Switch – 48 ports – L3 – Managed – stackable |
Enclosure Type: | Rack-mountable 1U |
Features: | Layer 3 switching, Layer 2 switching, auto-sensing per device, DHCP support, auto-negotiation, ARP support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, traffic shaping, MAC address filtering, IPv6 support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), Jumbo Frames support, Dynamic ARP Inspection (DAI) |
Flash Memory: | 32 MB Flash |
MAC Address Table Size: | 12K entries |
Max Units In A Stack: | 9 |
Ports: | 48 x 10/100 + 4 x SFP |
Remote Management Protocol: | SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, SSH-2 |
Routing Protocol: | RIP-1, RIP-2, EIGRP, static IP routing |
Status Indicators: | Port transmission speed, port duplex mode, bandwidth utilization %, power, link OK, system, link/activity |
Subtype: | Fast Ethernet |
Miscellaneous | |
---|---|
Compliant Standards: | GOST, CISPR 24, NOM, EN55024, EN55022 Class A, CISPR 22, EMC, UL 60950-1, IEC 60950-1, EN 60950-1, FCC Part 15 A |
Power | |
---|---|
Features: | Redundant Power System (RPS) connector |
Power Consumption Operational: | 130 Watt |
Power Device: | Internal power supply |
Voltage Required: | AC 120/230 V (50/60 Hz) |
Software / System Requirements | |
---|---|
Software Included: | Cisco IOS IP Base |