Description
Cisco WS-C3750G-48TS-E, Catalyst 3750 48 10/100/1000T + 4 SFP Enhanced Multilayer.
Linkom-PC is your source for Refurbished Cisco WS-C3750G-48TS-E. Most Cisco WS-C3750G-48TS-E are available within 3-4 days.
We make sure each item you receive is ready to use. Any configuration is reset to factory default settings in our REF process.
If you cannot find the product you are searching for, please request a quote.
WHY LINKOM-PC?
- Save 90%+ off the list
- Professional Advice
- Fully Tested
- Fast Delivery
Cisco WS-C3750G-48TS-E Technical Specifications
| Dimensions & Weight | |
|---|---|
| Depth: | 40.9 cm |
| Height: | 4.4 cm |
| Weight: | 6.4 kg |
| Width: | 44.5 cm |
| Environmental Parameters | |
|---|---|
| Humidity Range Operating: | 10 – 85% |
| Max Operating Temperature: | 45 °C |
| Min Operating Temperature: | 0 °C |
| Expansion / Connectivity | |
|---|---|
| Interfaces: | 48 x 10Base-T/100Base-TX/1000Base-T – RJ-45 ¦ 1 x console – RJ-45 management ¦ 1 x network stack device ¦ 4 x SFP (mini-GBIC) |
| General | |
|---|---|
| Authentication Method: | Kerberos, Secure Shell (SSH), RADIUS, TACACS+ |
| Compliant Standards: | IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s |
| Device Type: | Switch – 48 ports – L3 – Managed – stackable |
| Enclosure Type: | Rack-mountable 1U |
| Features: | Flow control, full duplex capability, Layer 3 switching, auto-sensing per device, IP-routing, DHCP support, auto-negotiation, ARP support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, traffic shaping, stackable, IPv6 support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS) |
| Flash Memory: | 32 MB Flash |
| MAC Address Table Size: | 12K entries |
| Max Units In A Stack: | 9 |
| Ports: | 48 x 10/100/1000 + 4 x SFP |
| RAM: | 128 MB |
| Remote Management Protocol: | SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, SSH |
| Routing Protocol: | OSPF, IGRP, BGP-4, IS-IS, RIP-1, RIP-2, EIGRP, HSRP, PIM-SM, static IP routing, PIM-DM, EIGRP for IPv6, OSPF for IPv6, policy-based routing (PBR), RIPng |
| Status Indicators: | Port status, port transmission speed, port duplex mode, status, link/activity |
| Subtype: | Gigabit Ethernet |
| Miscellaneous | |
|---|---|
| Compliant Standards: | FCC Class A certified, TUV GS, BSMI CNS 13438 Class A, CISPR 24, cUL, EN 60950, EN55022, NOM, VCCI Class A ITE, IEC 60950, EN55024, UL 60950 Third Edition, CISPR 22, CSA 22.2 No. 60950, CB, FCC Part 15, MIC, AS/NZS 3548 |
| MTBF: | 165,243 hours |
| Power | |
|---|---|
| Features: | Redundant Power System (RPS) connector |
| Power Consumption Operational: | 160 Watt |
| Power Device: | Internal power supply |
| Voltage Required: | AC 120/230 V (50/60 Hz) |
| Software / System Requirements | |
|---|---|
| Software Included: | Cisco IOS IP Services |
