Cisco WS-C3750G-48PS-S, Catalyst 3750 48 10/100/1000T PoE + 4 SFP Standard Image

295,00

Catalyst 3750 48 10/100/1000T PoE + 4 SFP Standard Image

Available on backorder

SKU: WS-C3750G-48PS-S Categories: , , Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Description

Cisco WS-C3750G-48PS-S, Catalyst 3750 48 10/100/1000T PoE + 4 SFP Standard Image.

Linkom-PC is your source for Refurbished Cisco WS-C3750G-48PS-S. Most Cisco WS-C3750G-48PS-S are available within 3-4 days.

We make sure each item you receive is ready to use. Any configuration is reset to factory default settings in our REF process.

If you cannot find the product you are searching for, please request a quote.

WHY LINKOM-PC?

  • Save 90%+ off the list
  • Professional Advice
  • Fully Tested
  • Fast Delivery

Cisco WS-C3750G-48PS-S Technical Specifications

Dimensions & Weight
Depth:40.9 cm
Height:4.4 cm
Weight:7 kg
Width:44.5 cm
Environmental Parameters
Humidity Range Operating:10 – 85% (non-condensing)
Max Operating Temperature:45 °C
Max Storage Temperature:70 °C
Min Operating Temperature:0 °C
Min Storage Temperature:-25 °C
Expansion / Connectivity
Interfaces:48 x 10Base-T/100Base-TX/1000Base-T – RJ-45 PoE ¦ 1 x console – RJ-45 management ¦ 1 x network stack device x 2 ¦ 4 x SFP (mini-GBIC)
General
Authentication Method:Kerberos, Secure Shell (SSH), RADIUS, TACACS+
Compliant Standards:IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s
Device Type:Switch – 48 ports – L3 – Managed – stackable
Enclosure Type:Rack-mountable 1U
Features:Flow control, full duplex capability, Layer 3 switching, auto-sensing per device, IP-routing, DHCP support, power over Ethernet (PoE), auto-negotiation, ARP support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, traffic shaping, stackable, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), RADIUS support, Jumbo Frames support, Cisco StackWise Technology, Cisco EnergyWise technology, Uni-Directional Link Detection (UDLD), Rapid Per-VLAN Spanning Tree Plus (PVRST+), Link Aggregation Control Protocol (LACP), Remote Switch Port Analyzer (RSPAN)
Flash Memory:32 MB Flash
Jumbo Frame Support:Yes
MAC Address Table Size:12K entries
Max Units In A Stack:9
Performance:Switching capacity: 32 Gbps ¦ Forwarding performance: 38.7 Mpps
Ports:48 x 10/100/1000 (PoE) + 4 x SFP
Power Over Ethernet (PoE):PoE
RAM:128 MB
Remote Management Protocol:SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, SSH, CLI
Routing Protocol:RIP-1, RIP-2, HSRP, static IP routing, RIPng
Status Indicators:Port transmission speed, port duplex mode, bandwidth utilization %, system, RPS (Redundant Power Supply), link/activity
Subtype:Gigabit Ethernet
Miscellaneous
Compliant Standards:FCC Class A certified, TUV GS, BSMI CNS 13438 Class A, CISPR 24, cUL, EN 60950, EN55022, NOM, VCCI Class A ITE, IEC 60950, EN55024, UL 60950 Third Edition, CISPR 22, CSA 22.2 No. 60950, CB, FCC Part 15, MIC, AS/NZS 3548
MTBF:141,005 hours
Power
Features:Redundant Power System (RPS) connector
Power Consumption Operational:590 Watt
Power Device:Internal power supply
Voltage Required:AC 120/230 V (50/60 Hz)
Software / System Requirements
Software Included:Cisco IOS IP Base

Additional information

Refurbished

Refurbished, tested, any configuration is reset to factory default settings in our REF process.