Cisco WS-C3750-24TS-S, Catalyst 3750 24 10/100 + 2 SFP Standard Multilayer Image

165,00

Catalyst 3750 24 10/100 + 2 SFP Standard Multilayer Image

Available on backorder

SKU: WS-C3750-24TS-S Categories: , , Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Description

Cisco WS-C3750-24TS-S, Catalyst 3750 24 10/100 + 2 SFP Standard Multilayer Image.

Linkom-PC is your source for Refurbished Cisco WS-C3750-24TS-S. Most Cisco WS-C3750-24TS-S are available within 3-4 days.

We make sure each item you receive is ready to use. Any configuration is reset to factory default settings in our REF process.

If you cannot find the product you are searching for, please request a quote.

WHY LINKOM-PC?

  • Save 90%+ off the list
  • Professional Advice
  • Fully Tested
  • Fast Delivery

Cisco WS-C3750-24TS-S Technical Specifications

Dimensions & Weight
Depth:30 cm
Height:4.4 cm
Weight:3.6 kg
Width:44.5 cm
Environmental Parameters
Humidity Range Operating:10 – 85%
Max Altitude Operating:3 km
Max Operating Temperature:45 °C
Min Operating Temperature:0 °C
Expansion / Connectivity
Interfaces:24 x 10Base-T/100Base-TX – RJ-45 ¦ 1 x console – RJ-45 management ¦ 1 x network stack device x 2 ¦ 2 x SFP (mini-GBIC)
General
Authentication Method:Kerberos, Secure Shell (SSH), RADIUS, TACACS+
Compliant Standards:IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s
Device Type:Switch – 24 ports – L3 – Managed – stackable
Enclosure Type:Rack-mountable 1U
Features:Flow control, full duplex capability, Layer 3 switching, auto-sensing per device, IP-routing, DHCP support, auto-negotiation, ARP support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, traffic shaping, stackable, IPv6 support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS)
Flash Memory:16 MB Flash
MAC Address Table Size:12K entries
Max Units In A Stack:9
Ports:24 x 10/100 + 2 x SFP
RAM:128 MB
Remote Management Protocol:SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, SSH
Routing Protocol:RIP-1, RIP-2, EIGRP, static IP routing, RIPng
Status Indicators:Port status, port transmission speed, port duplex mode, bandwidth utilization %, status, link/activity
Subtype:Fast Ethernet
Miscellaneous
Compliant Standards:TUV GS, BSMI CNS 13438 Class A, CISPR 24, EN 60950, EN55022, VCCI Class A ITE, IEC 60950, EN55024, UL 60950 Third Edition, CISPR 22, CB, AS/NZ 3548 Class A, MIC, CSA C22.2 No. 60950 Third Edition
MTBF:294,928 hours
Power
Features:Redundant Power System (RPS) connector
Power Consumption Operational:45 Watt
Power Device:Internal power supply
Voltage Required:AC 120/230 V (50/60 Hz)
Software / System Requirements
Software Included:Cisco IOS IP Base

Additional information

Refurbished

Refurbished, tested, any configuration is reset to factory default settings in our REF process.