Cisco WS-C3650-48FWD-S, Catalyst 3650 48 Port FPoE 2x10G Uplink w/5 AP licenses IPB

5.330,00

Catalyst 3650 48 Port FPoE 2x10G Uplink w/5 AP licenses IPB

Available on backorder

SKU: WS-C3650-48FWD-S Categories: , , Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Description

Cisco WS-C3650-48FWD-S, Catalyst 3650 48 Port FPoE 2x10G Uplink w/5 AP licenses IPB.

Linkom-PC is your source for Refurbished Cisco WS-C3650-48FWD-S. Most Cisco WS-C3650-48FWD-S are available within 3-4 days.

We make sure each item you receive is ready to use. Any configuration is reset to factory default settings in our REF process.

If you cannot find the product you are searching for, please request a quote.

WHY LINKOM-PC?

  • Save 90%+ off the list
  • Professional Advice
  • Fully Tested
  • Fast Delivery

Cisco WS-C3650-48FWD-S Technical Specifications

Dimensions & Weight
Depth:48.6 cm
Height:4.4 cm
Weight:7.8 kg
Width:44.5 cm
Environmental Parameters
Humidity Range Operating:5 – 96% (non-condensing)
Max Operating Temperature:45 °C
Max Storage Temperature:70 °C
Min Operating Temperature:-5 °C
Min Storage Temperature:-40 °C
Expansion / Connectivity
Expansion Slots:1 (total) / 1 (free) x Stacking Module
Interfaces:48 x 1000Base-T RJ-45 PoE+ – 30 W ¦ 1 x USB Type A ¦ 1 x serial (console) RJ-45 management ¦ 1 x management (Gigabit LAN) RJ-45 management ¦ 1 x management (mini-USB) Type B management ¦ 2 x 1000Base-X SFP uplink ¦ 2 x 10GBase-X SFP+ uplink
General
Authentication Method:Kerberos, Secure Shell (SSH), RADIUS, TACACS+
Capacity:IPv4 routes: 24000 ¦ NetFlow entries: 48000 ¦ Virtual interfaces (VLANs): 1000 ¦ Switched virtual interfaces (SVIs): 1000 ¦ Manageable access points: 5
Compliant Standards:IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ab (LLDP), IEEE 802.3at
Device Type:Switch – 48 ports – L3 – Managed – stackable
Enclosure Type:Desktop, rack-mountable 1U
Features:Full duplex capability, Layer 2 switching, DHCP support, auto-negotiation, ARP support, trunking, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, IPv6 support, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), RADIUS support, MLD snooping, Dynamic ARP Inspection (DAI), Unicast Reverse Path Forwarding (URPF), Uni-Directional Link Detection (UDLD), Rapid Per-VLAN Spanning Tree Plus (PVRST+), Shaped Round Robin (SRR), LLDP support, Link Aggregation Control Protocol (LACP), MAC Address Notification, Remote Switch Port Analyzer (RSPAN), Hot Standby Router Protocol (HSRP) support, Energy Efficient Ethernet, Strict Priority Queuing (SPQ), Class of Service (CoS), DiffServ Code Point (DSCP) support
Flash Memory:2 GB
Jumbo Frame Support:9198 bytes
MAC Address Table Size:32000 entries
Performance:Switching capacity: 176 Gbps ¦ Forwarding performance: 130.95 Mpps
PoE Budget:775 W
Ports:48 x 10/100/1000 (PoE+) + 2 x 10 Gigabit SFP+
Power Over Ethernet (PoE):PoE+
RAM:4 GB
Remote Management Protocol:SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, SSH, CLI
Routing Protocol:OSPF, RIP-1, RIP-2, static IP routing, RIPng
Status Indicators:Port transmission speed, port duplex mode, system, active, status, PoE
Subtype:Gigabit Ethernet
Miscellaneous
Compliant Standards:CISPR 22 Class A, GOST, BSMI CNS 13438 Class A, CISPR 24, EN 61000-3-2, NOM, EN 61000-3-3, EN55024, ICES-003 Class A, RoHS, UL 60950-1 Second Edition, KCC, FCC Part 15 A, ISO 7779, CSA C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, VCCI Class A, KN24, KN22 Class A, EN 55022 Class A
MTBF:383,760 hours
Rack Mounting Kit:Included
Power
Installed Qty:1 (installed) / 2 (max)
Power Device:Internal power supply – hot-plug
Power Provided:1025 Watt
Power Redundancy:Optional
Power Redundancy Scheme:1+1 (with optional power supply)
Voltage Required:AC 120/230 V (50/60 Hz)
Software / System Requirements
Software Included:Cisco IOS IP Base

Additional information

Refurbished

Refurbished, tested, any configuration is reset to factory default settings in our REF process.