Description
Cisco WS-C3560X-24T-S, Catalyst 3560X 24 Port Data IP Base.
Linkom-PC is your source for Refurbished Cisco WS-C3560X-24T-S. Most Cisco WS-C3560X-24T-S are available within 3-4 days.
We make sure each item you receive is ready to use. Any configuration is reset to factory default settings in our REF process.
If you cannot find the product you are searching for, please request a quote.
WHY LINKOM-PC?
- Save 90%+ off the list
- Professional Advice
- Fully Tested
- Fast Delivery
Cisco WS-C3560X-24T-S Technical Specifications
| Dimensions & Weight | |
|---|---|
| Depth: | 46 cm |
| Height: | 4.5 cm |
| Weight: | 7 kg |
| Width: | 44.5 cm |
| Environmental Parameters | |
|---|---|
| Humidity Range Operating: | 5 – 95% (non-condensing) |
| Max Storage Temperature: | 70 °C |
| Min Operating Temperature: | -5 °C |
| Min Storage Temperature: | -40 °C |
| Expansion / Connectivity | |
|---|---|
| Expansion Slots: | 1 (total) / 1 (free) x Expansion Slot |
| Interfaces: | 24 x 10Base-T/100Base-TX/1000Base-T – RJ-45 ¦ 1 x USB Type A ¦ 1 x console – mini-USB Type B management ¦ 1 x RS-232 – RJ-45 management ¦ 1 x 10Base-T/100Base-TX – RJ-45 management |
| General | |
|---|---|
| Authentication Method: | Kerberos, Secure Shell (SSH), RADIUS, TACACS+ |
| Capacity: | Virtual interfaces (VLANs): 1005 |
| Compliant Standards: | IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ae |
| Device Type: | Switch – 24 ports – Managed |
| Enclosure Type: | Rack-mountable 1U |
| Features: | Hot swap module replacement, Layer 2 switching, dynamic IP address assignment, DHCP support, power over Ethernet (PoE), auto-negotiation, ARP support, trunking, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, traffic shaping, Broadcast Storm Control, High Availability, Multicast Storm Control, Unicast Storm Control, Rapid Spanning Tree Protocol (RSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), Jumbo Frames support, MLD snooping, Dynamic ARP Inspection (DAI), PoE+, Per-VLAN Spanning Tree Plus (PVST+), Uni-Directional Link Detection (UDLD), Shaped Round Robin (SRR), Link Aggregation Control Protocol (LACP), Remote Switch Port Analyzer (RSPAN) |
| Flash Memory: | 128 MB Flash |
| Jumbo Frame Support: | 9216 bytes |
| Performance: | Switching fabric bandwidth: 160 Gbps |
| Ports: | 24 x 10/100/1000 |
| RAM: | 256 MB |
| Remote Management Protocol: | SNMP 1, SNMP 2, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, TFTP, SSH, CLI |
| Routing Protocol: | RIP-1, RIP-2, HSRP, static IP routing, RIPng |
| Status Indicators: | Port status, port transmission speed, port duplex mode, power, system, link/activity |
| Subtype: | Gigabit Ethernet |
| Miscellaneous | |
|---|---|
| Compliant Standards: | TUV GS, CISPR 22 Class A, GOST, cUL, NOM, VCCI Class A ITE, EN55022 Class A, CB, AS/NZS 60950-1, AS/NZ 3548 Class A, CCC, RoHS, UL 60950-1, IEC 60950-1, EN 60950-1, KCC, FCC Part 15 A, CSA C22.2 No. 60950-1 |
| MTBF: | 208,218 hours |
| Rack Mounting Kit: | Optional |
| Power | |
|---|---|
| Features: | Redundant Power System (RPS) connector |
| Installed Qty: | 1 (installed) / 2 (max) |
| Power Device: | Internal power supply |
| Power Redundancy: | Optional |
| Power Redundancy Scheme: | 1+1 (with optional power supply) |
| Voltage Required: | AC 120/230 V (50/60 Hz) |
| Software / System Requirements | |
|---|---|
| Software Included: | Cisco IOS IP Base |
