Cisco WS-C3560V2-24PS-E, Catalyst 3560V2 24 10/100 PoE + 2 SFP + IPS (Enhanced) Image.
Linkom-PC is your source for Refurbished Cisco WS-C3560V2-24PS-E. Most Cisco WS-C3560V2-24PS-E are available within 3-4 days.
We make sure each item you receive is ready to use. Any configuration is reset to factory default settings in our REF process.
If you cannot find the product you are searching for, please request a quote.
WHY LINKOM-PC?
- Save 90%+ off the list
- Professional Advice
- Fully Tested
- Fast Delivery
Cisco WS-C3560V2-24PS-E Technical Specifications
Dimensions & Weight | |
---|---|
Depth: | 29.5 cm |
Height: | 4.4 cm |
Weight: | 4.6 kg |
Width: | 44.3 cm |
Environmental Parameters | |
---|---|
Humidity Range Operating: | 10 – 85% |
Max Operating Temperature: | 45 °C |
Min Operating Temperature: | 0 °C |
Expansion / Connectivity | |
---|---|
Interfaces: | 24 x 100Base-TX RJ-45 PoE ¦ 1 x console RJ-45 management ¦ 2 x SFP (mini-GBIC) |
General | |
---|---|
Authentication Method: | Kerberos, RADIUS, TACACS+, Secure Shell v.2 (SSH2) |
Compliant Standards: | IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s |
Device Type: | Switch – 24 ports – L3 – Managed |
Enclosure Type: | Rack-mountable 1U |
Features: | Flow control, Layer 3 switching, auto-sensing per device, DHCP support, auto-negotiation, ARP support, load balancing, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, traffic shaping, MAC address filtering, IPv6 support, event log, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), Jumbo Frames support, Dynamic ARP Inspection (DAI) |
Flash Memory: | 32 MB Flash |
MAC Address Table Size: | 12K entries |
Ports: | 24 x 10/100 (PoE) + 2 x SFP |
Power Over Ethernet (PoE): | PoE |
Remote Management Protocol: | SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, SSH-2 |
Routing Protocol: | OSPF, IGRP, BGP-4, RIP-1, RIP-2, EIGRP, HSRP, DVMRP, PIM-SM, static IP routing, PIM-DM, policy-based routing (PBR) |
Status Indicators: | Port status, port transmission speed, port duplex mode, status, link/activity |
Subtype: | Fast Ethernet |
Miscellaneous | |
---|---|
Compliant Standards: | FCC Class A certified, CISPR 22 Class A, GOST, CISPR 24, NOM, EN55024, EN55022 Class A, CSA 22.2 No. 60950, EMC, FCC Part 15, UL 60950-1, IEC 60950-1 |
MTBF: | 275,360 hours |
Power | |
---|---|
Features: | Redundant Power System (RPS) connector |
Power Consumption Operational: | 435 Watt |
Power Device: | Internal power supply |
Voltage Required: | AC 120/230 V (50/60 Hz) |
Software / System Requirements | |
---|---|
Software Included: | Cisco IOS IP Services |