Cisco WS-C3560E-48TD-E, Catalyst 3560E 48 10/100/1000+2*10GE(X2),265W,IPS s/w
Cisco WS-C3560E-48TD-E, Catalyst 3560E 48 10/100/1000+2*10GE(X2),265W,IPS s/w
Cisco WS-C3560E-48TD-E, Catalyst 3560E 48 10/100/1000+2*10GE(X2),265W,IPS s/w - Linkom-PC
Cisco WS-C3560E-48TD-E, Catalyst 3560E 48 10/100/1000+2*10GE(X2),265W,IPS s/w - Linkom-PC

Cisco WS-C3560E-48TD-E, Catalyst 3560E 48 10/100/1000+2*10GE(X2),265W,IPS s/w

€260,00

Catalyst 3560E 48 10/100/1000+2*10GE(X2),265W,IPS s/w

Available on backorder

SKU: WS-C3560E-48TD-E Categories: , , Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Description

Cisco WS-C3560E-48TD-E, Catalyst 3560E 48 10/100/1000+2*10GE(X2),265W,IPS s/w.

Linkom-PC is your source for Refurbished Cisco WS-C3560E-48TD-E. Most Cisco WS-C3560E-48TD-E are available within 3-4 days.

We make sure each item you receive is ready to use. Any configuration is reset to factory default settings in our REF process.

If you cannot find the product you are searching for, please request a quote.

WHY LINKOM-PC?

  • Save 90%+ off the list
  • Professional Advice
  • Fully Tested
  • Fast Delivery

Cisco WS-C3560E-48TD-E Technical Specifications

Dimensions & Weight
Depth:44.19 cm
Height:4.45 cm
Weight:8.6 kg
Width:44.5 cm
Environmental Parameters
Humidity Range Operating:0 – 95% (non-condensing)
Humidity Range Storage:10 – 85% (non-condensing)
Max Operating Temperature:45 °C
Max Storage Temperature:70 °C
Min Operating Temperature:0 °C
Min Storage Temperature:-25 °C
Expansion / Connectivity
Interfaces:48 x 1000Base-T RJ-45 ¦ 1 x console RJ-45 management ¦ 1 x 100Base-TX RJ-45 management ¦ 2 x 10Gb Ethernet – X2
General
Authentication Method:Kerberos, Secure Shell (SSH), RADIUS, TACACS+
Capacity:Virtual interfaces (VLANs): 1000 ¦ Switched virtual interfaces (SVIs): 1000
Compliant Standards:IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s
Device Type:Switch – 48 ports – L3 – Managed
Enclosure Type:Desktop, rack-mountable 1U
Features:Auto-sensing per device, DHCP support, auto-negotiation, ARP support, trunking, VLAN support, auto-uplink (auto MDI/MDI-X), Cisco Gigabit EtherChannel, IGMP snooping, Syslog support, traffic shaping, Broadcast Storm Control, IPv6 support, half duplex mode, full duplex mode, Multicast Storm Control, Unicast Storm Control, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Access Control List (ACL) support, Quality of Service (QoS), Jumbo Frames support, Virtual Route Forwarding-Lite (VRF-Lite), MLD snooping, Dynamic ARP Inspection (DAI), Per-VLAN Spanning Tree Plus (PVST+), Uni-Directional Link Detection (UDLD), Rapid Per-VLAN Spanning Tree Plus (PVRST+), Shaped Round Robin (SRR), Link Aggregation Control Protocol (LACP), Remote Switch Port Analyzer (RSPAN), layer 3 load balancing
Flash Memory:64 MB Flash
Jumbo Frame Support:9216 bytes
Performance:Switching capacity: 128 Gbps ¦ Forwarding performance: 101.2 Mpps
Ports:48 x 10/100/1000 + 2 x X2
RAM:128 MB
Remote Management Protocol:SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, TFTP, SSH, CLI
Routing Protocol:OSPF, BGP-4, RIP-1, RIP-2, EIGRP, HSRP, DVMRP, PIM-SM, PIM-DM, EIGRP for IPv6, OSPFv3, PIM-SSM, static IPv4 routing, static IPv6 routing, policy-based routing (PBR), RIPng, WCCPv2
Status Indicators:Port transmission speed, port duplex mode, bandwidth utilization %, power, link OK, system, link/activity
Subtype:Gigabit Ethernet
Miscellaneous
Compliant Standards:NEBS level 3, FCC Class A certified, TUV GS, CISPR 22 Class A, GOST, cUL, NOM, VCCI Class A ITE, EN55022 Class A, CB, AS/NZS 60950-1, AS/NZ 3548 Class A, CCC, FCC Part 15, MIC, RoHS, UL 60950-1, IEC 60950-1, EN 60950-1, CSA C22.2 No. 60950-1
MTBF:166,907 hours
Power
Features:Redundant Power System (RPS) connector
Power Device:Internal power supply
Power Provided:265 Watt
Voltage Required:AC 120/230 V (50/60 Hz)
Software / System Requirements
Software Included:Cisco IOS IP Services

Additional information

Refurbished

Refurbished, tested, any configuration is reset to factory default settings in our REF process.

Related products

  • Cisco WS-C4500X-32SFP+, Catalyst 4500-X 32 Port 10G IP Base, Front-to-Back, ( Dual AC -R, 4x FAN)
    Add to cart

    Cisco WS-C4500X-32SFP+, Catalyst 4500-X 32 Port 10G IP Base, Front-to-Back, ( Dual AC -R, 4x FAN)

    €580,00
  • Cisco ASR1001-X, Cisco ASR1001-X Chassis, 6 built-in GE, Dual P/S, 8GB DRAM
    Add to cart

    Cisco ASR1001-X, Cisco ASR1001-X Chassis, 6 built-in GE, Dual P/S, 8GB DRAM

    €1.555,00
  • Cisco N77-F348XP-23, Cisco Nexus 7700 F3-Series 48 Port 1/10GbE (SFP/SFP+)
    Read more

    Cisco N77-F348XP-23, Cisco Nexus 7700 F3-Series 48 Port 1/10GbE (SFP/SFP+)

  • UCSV-EZ-C22-302-featured
    Read more

    Cisco UCSV-EZ-C22-302 UCS, C22 M3 SFF 1xE5-2420 1x8GB 1x450W RAILS