Cisco WS-C3560E-48PD-S, Catalyst 3560E 48 10/100/1000 PoE+2*10GE(X2),750W,IPB s/w

310,00

Catalyst 3560E 48 10/100/1000 PoE+2*10GE(X2),750W,IPB s/w

Available on backorder

SKU: WS-C3560E-48PD-S Categories: , , Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Description

Cisco WS-C3560E-48PD-S, Catalyst 3560E 48 10/100/1000 PoE+2*10GE(X2),750W,IPB s/w.

Linkom-PC is your source for Refurbished Cisco WS-C3560E-48PD-S. Most Cisco WS-C3560E-48PD-S are available within 3-4 days.

We make sure each item you receive is ready to use. Any configuration is reset to factory default settings in our REF process.

If you cannot find the product you are searching for, please request a quote.

WHY LINKOM-PC?

  • Save 90%+ off the list
  • Professional Advice
  • Fully Tested
  • Fast Delivery

Cisco WS-C3560E-48PD-S Technical Specifications

Dimensions & Weight
Depth:46 cm
Height:4.5 cm
Weight:8.8 kg
Width:44.5 cm
Environmental Parameters
Humidity Range Operating:0 – 95%
Max Operating Temperature:45 °C
Min Operating Temperature:0 °C
Expansion / Connectivity
Interfaces:48 x 1000Base-T RJ-45 PoE ¦ 1 x console RJ-45 management ¦ 1 x 100Base-TX RJ-45 management ¦ 2 x X2
General
Authentication Method:Kerberos, RADIUS, TACACS+, Secure Shell v.2 (SSH2)
Compliant Standards:IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s
Device Type:Switch – 48 ports – L3 – Managed
Enclosure Type:Rack-mountable 1U
Features:Full duplex capability, Layer 3 switching, Layer 2 switching, auto-sensing per device, IP-routing, DHCP support, power over Ethernet (PoE), auto-negotiation, trunking, MPLS support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, traffic shaping, manageable, IPv6 support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), DHCP server, Virtual Route Forwarding-Lite (VRF-Lite), MLD snooping, Dynamic ARP Inspection (DAI), Time Domain Reflectometry (TDR)
Flash Memory:64 MB Flash
MAC Address Table Size:12K entries
Ports:48 x 10/100/1000 (PoE) + 2 x X2
Power Over Ethernet (PoE):PoE
RAM:128 MB
Remote Management Protocol:SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, SSH-2
Routing Protocol:RIP-1, RIP-2, static IP routing, RIPng
Status Indicators:Port transmission speed, port duplex mode, bandwidth utilization %, power, link OK, system, link/activity
Subtype:Gigabit Ethernet
Miscellaneous
Compliant Standards:FCC Class A certified, TUV GS, BSMI CNS 13438 Class A, CISPR 24, cUL, EN 60950, EN55022, NOM, VCCI Class A ITE, IEC 60950, EN55024, UL 60950 Third Edition, CISPR 22, CSA 22.2 No. 60950, CB, AS/NZ 3548 Class A, FCC Part 15, MIC, RoHS
Power
Features:Redundant Power System (RPS) connector
Power Consumption Operational:540 Watt
Power Device:Internal power supply
Voltage Required:AC 120/230 V (50/60 Hz)
Software / System Requirements
Software Included:Cisco IOS IP Base

Additional information

Refurbished

Refurbished, tested, any configuration is reset to factory default settings in our REF process.