Description
Cisco WS-C3560E-48PD-EF, Catalyst 3560E 48 10/100/1000 PoE+2*10GE(X2),1150W,IPS s/w.
Linkom-PC is your source for Refurbished Cisco WS-C3560E-48PD-EF. Most Cisco WS-C3560E-48PD-EF are available within 3-4 days.
We make sure each item you receive is ready to use. Any configuration is reset to factory default settings in our REF process.
If you cannot find the product you are searching for, please request a quote.
WHY LINKOM-PC?
- Save 90%+ off the list
- Professional Advice
- Fully Tested
- Fast Delivery
Cisco WS-C3560E-48PD-EF Technical Specifications
Dimensions & Weight | |
---|---|
Depth: | 55.2 cm |
Height: | 4.5 cm |
Weight: | 9.5 kg |
Width: | 44.5 cm |
Environmental Parameters | |
---|---|
Humidity Range Operating: | 0 – 95% |
Max Operating Temperature: | 45 °C |
Min Operating Temperature: | 0 °C |
Expansion / Connectivity | |
---|---|
Interfaces: | 48 x 1000Base-T RJ-45 PoE ¦ 1 x console RJ-45 management ¦ 1 x 100Base-TX RJ-45 management ¦ 2 x X2 |
General | |
---|---|
Authentication Method: | Kerberos, Secure Shell (SSH), RADIUS, TACACS+ |
Compliant Standards: | IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s |
Device Type: | Switch – 48 ports – Managed |
Enclosure Type: | Rack-mountable 1U |
Features: | Full duplex capability, auto-sensing per device, IP-routing, DHCP support, power over Ethernet (PoE), auto-negotiation, ARP support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, traffic shaping, Broadcast Storm Control, IPv6 support, Multicast Storm Control, Unicast Storm Control, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), Virtual Route Forwarding-Lite (VRF-Lite), MLD snooping, Dynamic ARP Inspection (DAI) |
Flash Memory: | 64 MB Flash |
MAC Address Table Size: | 12K entries |
Ports: | 48 x 10/100/1000 (PoE) + 2 x X2 |
Power Over Ethernet (PoE): | PoE |
RAM: | 128 MB |
Remote Management Protocol: | SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP |
Routing Protocol: | OSPF, BGP-4, RIP-1, RIP-2, EIGRP, HSRP, PIM-SM, static IP routing, PIM-DM, OSPFv3, PIM-SSM, policy-based routing (PBR), RIPng |
Status Indicators: | Port transmission speed, port duplex mode, bandwidth utilization %, power, link OK, system, link/activity |
Subtype: | Gigabit Ethernet |
Miscellaneous | |
---|---|
Compliant Standards: | TUV GS, CISPR 22 Class A, cUL, EN 61000-3-2, VCCI Class A ITE, EN 61000-3-3, EN55024, EN55022 Class A, EN50082-1, CB, EN 61000-6-1, AS/NZ 3548 Class A, CCC, FCC Part 15, MIC, ICES-003 Class A, FCC CFR47 Part 15, UL 60950-1, IEC 60950-1, EN 60950-1, RoHS, EN 300 386 |
Power | |
---|---|
Features: | Redundant Power System (RPS) connector |
Power Consumption Operational: | 1.15 kW |
Power Device: | Internal power supply |
Voltage Required: | AC 120/230 V (50/60 Hz) |
Software / System Requirements | |
---|---|
Software Included: | Cisco IOS IP Services |