Description
Cisco WS-C3560E-12SD-E, Catalyst 3560E 12 SFP+2*10GE(X2), IPS s/w.
Cisco Catalyst 3560-E Series is an enterprise-class line of standalone access and aggregation switches that facilitate the deployment of secure converged applications while maximizing investment protection for evolving network and application requirements. Combining 10/100/1000 and Power over Ethernet (PoE) configurations with 10 Gigabit Ethernet uplinks, the Cisco Catalyst 3560-E Series access switches enhance worker productivity by enabling applications such as IP telephony, wireless, and video. Cisco Catalyst 3560-E Series aggregation switches deliver secure non-stop unified network services and versatile connectivity in a one rack-unit (1-RU) form factor for space and power constrained environments, enabling businesses to reduce total cost of ownership while maximizing investment protection.
Linkom-PC is your source for Refurbished Cisco WS-C3560E-12SD-E. Most Cisco WS-C3560E-12SD-E are available within 3-4 days.
We make sure each item you receive is ready to use. Any configuration is reset to factory default settings in our REF process.
If you cannot find the product you are searching for, please request a quote.
WHY LINKOM-PC?
- Save 90%+ off the list
- Professional Advice
- Fully Tested
- Fast Delivery
Cisco WS-C3560E-12SD-E Technical Specifications
Dimensions & Weight | |
---|---|
Depth: | 38.1 cm |
Height: | 4.5 cm |
Weight: | 7.3 kg |
Width: | 44.5 cm |
Environmental Parameters | |
---|---|
Humidity Range Operating: | 0 – 95% (non-condensing) |
Humidity Range Storage: | 10 – 85% (non-condensing) |
Max Operating Temperature: | 45 °C |
Max Storage Temperature: | 70 °C |
Min Operating Temperature: | 0 °C |
Min Storage Temperature: | -25 °C |
Expansion / Connectivity | |
---|---|
Interfaces: | 2 x 10Gb Ethernet – X2 ¦ 1 x console RJ-45 management ¦ 1 x 100Base-TX RJ-45 management ¦ 12 x SFP (mini-GBIC) |
General | |
---|---|
Authentication Method: | Kerberos, Secure Shell (SSH), RADIUS, TACACS+ |
Capacity: | Virtual interfaces (VLANs): 1000 ¦ Switched virtual interfaces (SVIs): 1000 |
Compliant Standards: | IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s |
Device Type: | Switch – 12 ports – L3 – Managed |
Enclosure Type: | Rack-mountable 1U |
Features: | Auto-sensing per device, DHCP support, auto-negotiation, ARP support, trunking, VLAN support, auto-uplink (auto MDI/MDI-X), Cisco Gigabit EtherChannel, IGMP snooping, Syslog support, traffic shaping, Broadcast Storm Control, IPv6 support, half duplex mode, full duplex mode, Multicast Storm Control, Unicast Storm Control, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Access Control List (ACL) support, Quality of Service (QoS), Jumbo Frames support, Virtual Route Forwarding-Lite (VRF-Lite), MLD snooping, Dynamic ARP Inspection (DAI), Per-VLAN Spanning Tree Plus (PVST+), Uni-Directional Link Detection (UDLD), Rapid Per-VLAN Spanning Tree Plus (PVRST+), Shaped Round Robin (SRR), Link Aggregation Control Protocol (LACP), Remote Switch Port Analyzer (RSPAN), layer 3 load balancing |
Flash Memory: | 64 MB Flash |
Jumbo Frame Support: | 9216 bytes |
Performance: | Switching capacity: 68 Gbps ¦ Forwarding performance: 47.6 Mpps |
Ports: | 12 x Gigabit SFP + 2 x X2 |
Remote Management Protocol: | SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, TFTP, SSH, CLI |
Routing Protocol: | OSPF, BGP-4, RIP-1, RIP-2, EIGRP, HSRP, DVMRP, PIM-SM, PIM-DM, EIGRP for IPv6, OSPFv3, PIM-SSM, static IPv4 routing, static IPv6 routing, policy-based routing (PBR), RIPng, WCCPv2 |
Status Indicators: | Port transmission speed, port duplex mode, bandwidth utilization %, power, link OK, system, link/activity |
Subtype: | Gigabit Ethernet |
Miscellaneous | |
---|---|
Compliant Standards: | NEBS level 3, FCC Class A certified, TUV GS, CISPR 22 Class A, GOST, cUL, NOM, VCCI Class A ITE, EN55022 Class A, CB, AS/NZS 60950-1, AS/NZ 3548 Class A, CCC, FCC Part 15, MIC, RoHS, UL 60950-1, IEC 60950-1, EN 60950-1, CSA C22.2 No. 60950-1 |
MTBF: | 206,950 hours |
Power | |
---|---|
Installed Qty: | 2 (installed) / 2 (max) |
Power Consumption Operational: | 82 Watt |
Power Device: | Internal power supply – hot-plug |
Power Redundancy: | Yes |
Power Redundancy Scheme: | 1+1 |
Software / System Requirements | |
---|---|
Software Included: | Cisco IOS IP Services |