Cisco WS-C3560-48TS-S, Catalyst 3560 48 10/100 + 4 SFP Standard Image.
Linkom-PC is your source for Refurbished Cisco WS-C3560-48TS-S. Most Cisco WS-C3560-48TS-S are available within 3-4 days.
We make sure each item you receive is ready to use. Any configuration is reset to factory default settings in our REF process.
If you cannot find the product you are searching for, please request a quote.
WHY LINKOM-PC?
- Save 90%+ off the list
- Professional Advice
- Fully Tested
- Fast Delivery
Cisco WS-C3560-48TS-S Technical Specifications
Dimensions & Weight | |
---|---|
Depth: | 30 cm |
Height: | 4.4 cm |
Weight: | 4.1 kg |
Width: | 44.5 cm |
Environmental Parameters | |
---|---|
Humidity Range Operating: | 10 – 85% |
Max Operating Temperature: | 45 °C |
Min Operating Temperature: | 0 °C |
Expansion / Connectivity | |
---|---|
Interfaces: | 48 x 100Base-TX RJ-45 ¦ 1 x console RJ-45 management ¦ 4 x SFP (mini-GBIC) |
General | |
---|---|
Authentication Method: | Kerberos, RADIUS, TACACS+, Secure Shell v.2 (SSH2) |
Compliant Standards: | IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s |
Device Type: | Switch – 48 ports – L3 – Managed |
Enclosure Type: | Desktop 1U |
Features: | Full duplex capability, Layer 3 switching, Layer 2 switching, auto-sensing per device, IP-routing, DHCP support, auto-negotiation, trunking, MPLS support, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, traffic shaping, manageable, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Trivial File Transfer Protocol (TFTP) support, Access Control List (ACL) support, Quality of Service (QoS), DHCP server, Virtual Route Forwarding-Lite (VRF-Lite), MLD snooping, Dynamic ARP Inspection (DAI), Time Domain Reflectometry (TDR) |
Flash Memory: | 32 MB Flash |
MAC Address Table Size: | 12K entries |
Ports: | 48 x 10/100 + 4 x SFP |
RAM: | 128 MB |
Remote Management Protocol: | SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, SSH-2 |
Routing Protocol: | RIP-1, RIP-2, static IP routing, RIPng |
Status Indicators: | Port status, port transmission speed, port duplex mode, power, link OK, system |
Subtype: | Fast Ethernet |
Miscellaneous | |
---|---|
Compliant Standards: | FCC Class A certified, TUV GS, BSMI CNS 13438 Class A, CISPR 24, cUL, EN 60950, EN55022, NOM, VCCI Class A ITE, IEC 60950, EN55024, UL 60950 Third Edition, CISPR 22, CSA 22.2 No. 60950, CB, AS/NZ 3548 Class A, FCC Part 15, MIC |
MTBF: | 280,900 hours |
Power | |
---|---|
Features: | Redundant Power System (RPS) connector |
Power Consumption Operational: | 65 Watt |
Power Device: | Internal power supply |
Voltage Required: | AC 120/230 V (50/60 Hz) |
Software / System Requirements | |
---|---|
Software Included: | Cisco IOS IP Base |