Cisco WS-C2960L-48TQ-LL, Catalyst 2960L 48 port GigE, 4x10G SFP+, Lan Lite.
WS-C2960L-48TQ-LL offering 48 x GigE ports, 4 x 10G SFP and LAN Lite, is one of the Cisco Catalyst 2960-L Series Switches. These 2960-L switches are fixed-configuration, Gigabit Ethernet switches that provide entry-level enterprise-class Layer 2 access for branch offices, conventional workspaces, and out-of-wiring closet applications. Designed for operational simplicity to lower total cost of ownership, they enable secure and energy-efficient business operations with a range of Cisco IOS Software features.
Linkom-PC is your source for Refurbished Cisco WS-C2960L-48TQ-LL. Most Cisco WS-C2960L-48TQ-LL are available within 3-4 days.
We make sure each item you receive is ready to use. Any configuration is reset to factory default settings in our REF process.
If you cannot find the product you are searching for, please request a quote.
WHY LINKOM-PC?
- Save 90%+ off the list
- Professional Advice
- Fully Tested
- Fast Delivery
WS-C2960L-48TQ-LL Specification
WS-C2960L-48TQ-LL Specification |
|
Configurations | |
10/100/1000 Ethernet Ports | 48 |
Uplink Interfaces | 4 SFP |
Available PoE Power | – |
Fanless | Y |
Dimensions (H x D x W) | 1.73 x 9.45 x 17.5 in. (4.4 x 24 x 44.5 cm) |
Net Weight | 6.68 lb (3.03 kg) |
Console Ports | |
RJ45 Ethernet | 1 |
USB mini-B | 1 |
USB-A port for storage and Bluetooth console | 1 |
Memory and Processor | |
CPU | ARMv7 800 MHz |
DRAM | 512 MB |
Flash memory | 256 MB |
Performance | |
Forwarding bandwidth | 99 Gbps |
Switching bandwidth | 176 Gbps |
Forwarding rate (64-byte L3 packets) | 77.38 Mpps |
Unicast MAC addresses | 8K |
Maximum active VLANs | 64 |
VLAN IDs available | 4094 |
Maximum STP instances | 64 |
Maximum SPAN sessions | 1 |
MTU-L3 packet | 9198 bytes |
Jumbo Ethernet frame | 10,240 bytes |
MTBF in hours (Data) | 1,370,769 |
MTBF in hours (PoE) | 437,970 |
Environment | |
Operating temperature | |
Up to 5,000 ft | 23ºF to 113ºF (–5ºC to 45ºC) |
Up to 10,000 ft | 23ºF to 104ºF (–5ºC to 40ºC) |
Operating altitude | 10,000 ft (3000m) |
Operating relative humidity | 5% to 90% at 40ºC |
Storage temperature | –13º to 158ºF (–25º to 70ºC) |
Storage altitude | 15,000 ft (4500m) |
Storage relative humidity | 5% to 95% at 65ºC |
Storage altitude | Minimum ambient temperature for cold start is 0°C (32°F) |
Electrical | Data |
Voltage (autoranging) | 110 to 220V AC in |
Frequency | 50 to 60 Hz |
Current | 0.29A to 0.48A |
Power rating (maximum consumption) | 0.09 kVA |
Power consumption (watts)
0% traffic 10% traffic 100% traffic Weighted average |
29.7 41.1 41.1 37.3 |
Safety and Compliance | |
Safety | UL 60950-1 Second Edition, CAN/CSA-C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, AS/NZS 60950-1 |
EMC: emissions | 47CFR Part 15 (CFR 47) Class A, AS/NZS CISPR22 Class A, CISPR22 Class A, EN55022 Class A, ICES003 Class A, VCCI Class A, EN61000-3-2, EN61000-3-3, KN22 Class A, CNS13438 Class A |
EMC: immunity | EN55024, CISPR24, EN300386, KN24 |
Environmental | Reduction of Hazardous Substances (RoHS) including Directive 2011/65/EU |
Telco | Common Language Equipment Identifier (CLEI) code |
U.S. government certifications | USGv6 and IPv6 Ready Logo |
Connectors and Interfaces | |
Ethernet interfaces | 10BASE-T ports: RJ-45 connectors, 2-pair Category 3, 4, or 5 unshielded twisted-pair (UTP) cabling |
100BASE-TX ports: RJ-45 connectors, 2-pair Category 5 UTP cabling | |
1000BASE-T ports: RJ-45 connectors, 4-pair Category 5 UTP cabling | |
1000BASE-T SFP-based ports: RJ-45 connectors, 4-pair Category 5 UTP cabling | |
Indicator LEDs | Per-port status: link integrity, disabled, activity, speed, and full duplex |
System status: system, PoE, and link speed | |
Console cables | CAB-CONSOLE-RJ45 Console cable 6 ft. with RJ-45 |
CAB-CONSOLE-USB Console cable 6 ft. with USB Type A and mini-B connectors | |
Power | Use the supplied AC power cord to connect the AC power connector to an AC power outlet |