Cisco WS-C2960-24TC-L, Catalyst 2960 Plus 24 10/100 + 2T/SFP LAN Base

Cisco WS-C2960-24TC-L, Catalyst 2960 Plus 24 10/100 + 2T/SFP LAN Base.

Cisco Catalyst 2960-Plus 24 Ports LAN Base Switches, supporting 24 x 10/100 ports, are designed for branches, conventional office workspaces, and infrastructure networks.

Cisco WS-C2960-24TC-L, Catalyst 2960 Plus 24 10/100 + 2T/SFP LAN Base.

Cisco Catalyst 2960-Plus 24 Ports LAN Base Switches, supporting 24 x 10/100 ports, are designed for branches, conventional office workspaces, and infrastructure networks.

WS-C2960+24TC-L Specification

WS-C2960+24TC-L Specification

Configurations
10/100 Ethernet Interfaces24
Uplink Interfaces2 (SFP or 1000BASE-T)
Cisco IOS Software Feature SetLAN Base
Available PoE PowerNone
Hardware
Flash memory64 MB
DRAM128 MB
Performance and Scalability
Forwarding bandwidth16 Gbps
Maximum active VLANs255
VLAN IDs available4K
Maximum transmission unit (MTU) – L3 packet9000 bytes
Jumbo frame – Ethernet frame9018 bytes
Forwarding Rate: 64-Byte L3 Packets, Millions of packets per second6.5
Mechanical
Dimensions (H x W x D)1.73 x 17.70 x 9.52 in (4.4 x 45.0 x 24.2 cm)
Weight8 lb (3.6 Kg)
Package Weight17.04 lb (7.73 Kg)
Environmental Ranges
Operating temperature up to 5000 ft (1500 m)23º to 113ºF

(-5º to 45ºC)

Operating temperature up to 10,000 ft (3000 m)23º to 104ºF

(-5º to 40ºC)

Short-term exception at sea level*23º to 131ºF

(-5º to 55ºC)

Short-term exception up to 5000 feet (1500 m)*23º to 122ºF

(-5º to 50ºC)

Short-term exception up to 10,000 feet (3000 m)*23º to 113ºF

(-5º to 45ºC)

Short-term exception up to 13,000 feet (4000 m)*23º to 104ºF

(-5º to 40ºC)

Storage temperature up to 15,000 feet (4573 m)23º to 158ºF

(-25º to 70ºC)

Operating altitudeUp to 10,000 Feet

(Up to 3,000 Meters)

Storage altitudeUp to 13,000 Feet

(Up to 4,000 Meters)

Operating relative humidity10% to 95% noncondensing
Storage relative humidity10% to 95% noncondensing
Sound Pressure, dBATypical, LpAm: 33

Maximum, LpAD: 36

Sound Power, dbATypical, LwA: 43

Maximum, LwAD: 46

MTBF in thousands of hours667
Connectors and Interfaces
Ethernet Interfaces
  • 10BASE-T ports: RJ-45 connectors, 2-pair Category 3, 4, or 5 unshielded twisted-pair (UTP) cabling
  • 100BASE-TX ports: RJ-45 connectors, 2-pair Category 5 UTP cabling
  • 1000BASE-T ports: RJ-45 connectors, 4-pair Category 5 UTP cabling
  • 1000BASE-T SFP-based ports: RJ-45 connectors, 4-pair Category 5 UTP cabling
Indicator LEDs
  • Per-port status: Link integrity, disabled, activity, speed, and full duplex
  • System status, Port Status, RPS, link duplex, and link speed
ConsoleCisco Catalyst console cables:

  • CAB-CONSOLE-RJ45 Console cable 6 ft. with RJ-45
Power
  • The internal power supply is an auto-ranging unit and supports input voltages between 100 and 240V AC.
  • Use the supplied AC power cord to connect the AC power connector to an AC power outlet.
  • The Cisco RPS connector offers connection for an optional Cisco RPS 2300 that uses AC input and supplies DC output to the switch.
  • Only the Cisco RPS 2300 (model PWR-RPS2300) should be attached to the redundant-power-system receptacle.
Management and Standards Support
Management
  • BRIDGE-MIB
  • CISCO-CABLE-DIAG-MIB
  • CISCO-CDP-MIB
  • CISCO-CLUSTER-MIB
  • CISCO-CONFIG-COPY-MIB
  • CISCO-CONFIG-MAN-MIB
  • CISCO-DHCP-SNOOPING-MIB
  • CISCO-ENTITY-VENDORTYPE-OID-MIB
  • CISCO-ENVMON-MIB
  • CISCO-ERR-DISABLE-MIB
  • CISCO-FLASH-MIB
  • CISCO-FTP-CLIENT-MIB
  • CISCO-IGMP-FILTER-MIB
  • CISCO-IMAGE-MIB
  • CISCO-IP-STAT-MIB
  • CISCO-LAG-MIB
  • CISCO-MAC-NOTIFICATION-MIB
  • CISCO-MEMORY-POOL-MIB
  • CISCO-PAGP-MIB
  • CISCO-PING-MIB
  • CISCO-POE-EXTENSIONS-MIB
  • CISCO-PORT-QOS-MIB
  • CISCO-PORT-SECURITY-MIB
  • CISCO-PORT-STORM-CONTROL-MIB
  • CISCO-PRODUCTS-MIB
  • CISCO-PROCESS-MIB
  • CISCO-RTTMON-MIB
  • CISCO-SMI-MIB
  • CISCO-STP-EXTENSIONS-MIB
  • CISCO-SYSLOG-MIB
  • CISCO-TC-MIB
  • CICSO-TCP-MIB
  • CISCO-UDLDP-MIB
  • CISCO-VLAN-IFTABLE
  • RELATIONSHIP-MIB
  • CISCO-VLAN-MEMBERSHIP-MIB
  • CISCO-VTP-MIB
  • ENTITY-MIB
  • ETHERLIKE-MIB
  • IEEE8021-PAE-MIB
  • IEEE8023-LAG-MIB
  • IF-MIB
  • INET-ADDRESS-MIB
  • OLD-CISCO-CHASSIS-MIB
  • OLD-CISCO-FLASH-MIB
  • OLD-CISCO-INTERFACES-MIB
  • OLD-CISCO-IP-MIB
  • OLD-CISCO-SYS-MIB
  • OLD-CISCO-TCP-MIB
  • OLD-CISCO-TS-MIB
  • RFC1213-MIB
  • RMON-MIB
  • RMON2-MIB
  • SNMP-FRAMEWORK-MIB
  • SNMP-MPD-MIB
  • SNMP-NOTIFICATION-MIB
  • SNMP-TARGET-MIB
  • SNMPv2-MIB
  • TCP-MIB
  • UDP-MIB
  • ePM MIB
Standards
  • IEEE 802.1D Spanning Tree Protocol
  • IEEE 802.1p CoS Prioritization
  • IEEE 802.1Q VLAN
  • IEEE 802.1s
  • IEEE 802.1w
  • IEEE 802.1X
  • IEEE 802.1ab (LLDP)
  • IEEE 802.3ad
  • IEEE 802.3af
  • IEEE 802.3ah (100BASE-X single/multimode fiber only)
  • IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T ports
  • IEEE 802.3 10BASE-T
  • IEEE 802.3u 100BASE-TX
  • IEEE 802.3ab 1000BASE-T
  • IEEE 802.3z 1000BASE-X
  • RMON I and II standards
  • SNMP v1, v2c, and v3
RFC compliance
  • RFC 768 – UDP
  • RFC 783 – TFTP
  • RFC 791 – IP
  • RFC 792 – ICMP
  • RFC 793 – TCP
  • RFC 826 – ARP
  • RFC 854 – Telnet
  • RFC 951 – Bootstrap Protocol (BOOTP)
  • RFC 959 – FTP
  • RFC 1112 – IP Multicast and IGMP
  • RFC 1157 – SNMP v1
  • RFC 1166 – IP Addresses
  • RFC 1256 – Internet Control Message Protocol (ICMP) Router Discovery
  • RFC 1305 – NTP
  • RFC 1492 – TACACS+
  • RFC 1493 – Bridge MIB
  • RFC 1542 – BOOTP extensions
  • RFC 1643 – Ethernet Interface MIB
  • RFC 1757 – RMON
  • RFC 1901 – SNMP v2C
  • RFC 1902-1907 – SNMP v2
  • RFC 1981 – Path MTU Discovery for IPv6
  • FRC 2068 – HTTP
  • RFC 2131 – DHCP
  • RFC 2138 – RADIUS
  • RFC 2233 – IF MIB v3
  • RFC 2373 – IPv6 Aggregatable Addrs
  • RFC 2460 – IPv6
  • RFC 2461 – IPv6 Neighbor Discovery
  • RFC 2462 – IPv6 Autoconfiguration
  • RFC 2463 – ICMP IPv6
  • RFC 2474 – Differentiated Services (DiffServ) Precedence
  • RFC 2597 – Assured Forwarding
  • RFC 2598 – Expedited Forwarding
  • RFC 2571 – SNMP Management
  • RFC 3046 – DHCP Relay Agent Information Option
  • RFC 3376 – IGMP v3
  • RFC 3580 – 802.1X RADIUS
Voltage and Power Ratings
Voltage (Autoranging)100 to 240 VAC
Current (Amperes)0.4 – 0.2
Frequency50 to 60Hz
Power Rating (kVA)0.03
DC Input Voltages (RPS Input)2A at 12V
Power Consumption0% traffic: 18.4

10% traffic: 18.3

100% traffic: 18.6

ATIS weighted average: 18.3

Safety and Compliance
Regulatory ComplianceProducts should comply with CE Marking per directives 2004/108/EC and 2006/95/EC
SafetyUL 60950-1 Second Edition

CAN/CSA-C22.2 No. 60950-1 Second Edition

EN 60950-1 Second Edition

IEC 60950-1 Second Edition

AS/NZS 60950-1

EMC – Emissions47CFR Part 15 (CFR 47) Class A

AS/NZS CISPR22 Class A

CISPR22 Class A

EN55022 Class A

ICES003 Class A

VCCI Class A

EN61000-3-2

EN61000-3-3

KN22 Class A

CNS13438 Class A

EMC – ImmunityEN55024

CISPR24

EN300386

KN24

EnvironmentalReduction of Hazardous Substances (RoHS) including Directive 2011/65/EU

 

Additional information

Refurbished

Refurbished

You may also like…