Cisco WS-C2960-24LT-L, Catalyst 2960 24 10/100 (8 PoE)+ 2 1000BT LAN Base Image

Catalyst 2960 24 10/100 (8 PoE)+ 2 1000BT LAN Base Image

Available on backorder

Description

Catalyst 2960 24 10/100 (8 PoE)+ 2 1000BT LAN Base Image

Dimensions & Weight
Depth:23.63 cm
Height:4.4 cm
Weight:4.54 kg
Width:44.5 cm
Environmental Parameters
Humidity Range Operating:10 – 95% (non-condensing)
Humidity Range Storage:10 – 95% (non-condensing)
Max Operating Temperature:40 °C
Max Storage Temperature:70 °C
Min Operating Temperature:-5 °C
Min Storage Temperature:-25 °C
Expansion / Connectivity
Interfaces:8 x 100Base-TX RJ-45 PoE ¦ 2 x 1000Base-T RJ-45 ¦ 16 x 100Base-TX RJ-45
General
Authentication Method:Secure Shell (SSH), RADIUS, TACACS+
Compliant Standards:IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ab (LLDP)
Device Type:Switch – 24 ports – Managed
Enclosure Type:Rack-mountable 1U
Encryption Algorithm:SSL
Features:Layer 2 switching, auto-sensing per device, dynamic IP address assignment, power over Ethernet (PoE), auto-negotiation, BOOTP support, ARP support, load balancing, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, DiffServ support, Broadcast Storm Control, IPv6 support, Multicast Storm Control, Unicast Storm Control, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAgP) support, Access Control List (ACL) support, Quality of Service (QoS), Link Aggregation Control Protocol (LACP), Port Security, MAC Address Notification, Remote Switch Port Analyzer (RSPAN)
Flash Memory:32 MB
MAC Address Table Size:8K entries
Performance:Switching capacity: 32 Gbps ¦ Forwarding performance (64-byte packet size): 6.5 Mpps
Ports:24 x 10/100 + 2 x 10/100/1000
Power Over Ethernet (PoE):PoE
RAM:64 MB
Remote Management Protocol:SNMP 1, SNMP 2, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS, TFTP, SSH
Status Indicators:Port transmission speed, port duplex mode, power, link OK, system, link/activity
Subtype:Fast Ethernet
Miscellaneous
Compliant Standards:TUV GS, CISPR 22 Class A, GOST, BSMI CNS 13438 Class A, CISPR 24, NOM, VCCI Class A ITE, EN55024, CB, EMC, MIC, IEC 60950-1, EN 60950-1, UL 60950-1 Second Edition, RoHS, CSA C22.2 No. 60950-1, FCC Part 15 B Class A
MTBF:402,926 hours
Rack Mounting Kit:Optional
Power
Power Consumption Operational:36 Watt
Power Device:Internal power supply
Voltage Required:AC 120/230 V (50/60 Hz)
Software / System Requirements
Software Included:Cisco LAN Base software