Cisco RSP720-3C-10GE, Cisco 7600 Route Switch Processor 720Gbps fabric, PFC3C, 10G.
The Cisco ® 7600 Series Route Switch Processor 720 with 10 Gigabit Ethernet uplinks (RSP720-10GE) is designed to deliver the high scalability, performance, and fast convergence required for today and tomorrow’s demanding voice, video, data, and mobility (quadruple-play) services. The Cisco 7600 Series RSP720-10GE (Figure 1) offers Carrier Ethernet service providers tremendous flexibility, scalability, and performance at the access or aggregation edge while deploying advanced IP video and triple-play (voice, video, and data) system applications in both the residential and business services markets. In essence, it gives service providers and enterprises true service convergence with the ability to manage a wide variety of applications over a range of access media using a single platform, the Cisco 7600 Series Routers.
RSP720-3C-10GE Specification
RSP720-3C-10GE Specification |
|
| General | |
| Device Type | Router |
| Enclosure Type | Plug-in module |
| Connectivity Technology | Wired |
| Data Link Protocol | Ethernet, Fast Ethernet, Gigabit Ethernet, 10 Gigabit Ethernet |
| Performance | Switching capacity: 720 Gbps ¦ IPv4 routing: 400 Mbps ¦ IPv6 routing: 200 Mbps |
| Capacity | ACL rules: 128000 ¦ IPv4 routes: 256000 ¦ IPv6 routes: 128000 ¦ NetFlow entries: 128000 |
| Network / Transport Protocol | TCP/IP, ICMP/IP |
| Routing Protocol | OSPF, RIP, BGP-4, IS-IS, PIM-SM, PIM-DM, GRE |
| Features | Layer 3 switching, layer 2 switching, dynamic IP address assignment, DHCP support, NAT support, MPLS support, VLAN support, IGMP snooping, traffic shaping, DoS attack prevention, Access Control List (ACL) support, Quality of Service (QoS), MPLS VPN |
| Compliant Standards | IEEE 802.1x, CISPR 22 Class A, EN 60950, VCCI Class A ITE, IEC 60950, EN55024, EN55022 Class A, UL 60950, EN50082-1, CSA 22.2 No. 60950, EN 61000-6-1, ACA TS001, AS/NZS 3260, EMC, ICES-003 Class A, EN300-386, FCC CFR21 Part 1040, FCC Part 15 A, IEC 60825-1, EN 60825-1, AS/NZS 3548 Class A, EN 60825-2, IEC 60825-2 |
| RAM | 2 GB (installed) / 6 GB (max) |
| Flash Memory | 512 MB |
| Status Indicators | System, active, status, link/activity |
| Expansion / Connectivity | |
| Interfaces | Management: 1 x console – RJ-45 ¦ 1 x 10Base-T/100Base-TX/1000Base-T – RJ-45 ¦ 2 x SFP (mini-GBIC) ¦ 2 x X2 ¦ 1 x USB – 4 pin USB Type B ¦ 1 x USB – 4 pin USB Type A |
| Expansion Slots | 2 (total) / 1 (free) x CompactFlash Card – type II |
| Miscellaneous | |
| MTBF | 80,000 hours |
| Dimensions & Weight | |
| Width | 15.4 in |
| Depth | 17 in |
| Height | 1.6 in |
| Weight | 11.76 lbs |
| Manufacturer Warranty | |
| Service & Support | Limited warranty – advance parts replacement – 90 days – response time: 10 days |
| Environmental Parameters | |
| Min Operating Temperature | 32 °F |
| Max Operating Temperature | 104 °F |
| Humidity Range Operating | 10 – 90% (non-condensing) |
| Compatibility Information | |
| Designed For | Cisco 7603-S, 7604, 7604 Security Bundle, 7606-S, 7609, 7609 Security Bundle, 7609-S, 7613 Security Bundle |