Description
Cisco N6K-C6001-64P, Nexus 6001, 1RU switch, fixed 48p of 10G SFP+ and 4p QSFP+.
Linkom-PC is your source for Refurbished Cisco N6K-C6001-64P. Most Cisco N6K-C6001-64P are available within 3-4 days.
We make sure each item you receive is ready to use. Any configuration is reset to factory default settings in our REF process.
If you cannot find the product you are searching for, please request a quote.
WHY LINKOM-PC?
- Save 90%+ off the list
- Professional Advice
- Fully Tested
- Fast Delivery
Cisco N6K-C6001-64P Technical Specifications
| Dimensions & Weight | |
|---|---|
| Depth: | 76.2 cm |
| Height: | 4.4 cm |
| Weight: | 14.51 kg |
| Width: | 43.9 cm |
| Environmental Parameters | |
|---|---|
| Humidity Range Operating: | 5 – 95% (non-condensing) |
| Max Operating Temperature: | 40 °C |
| Max Storage Temperature: | 70 °C |
| Min Operating Temperature: | 0 °C |
| Min Storage Temperature: | -40 °C |
| Expansion / Connectivity | |
|---|---|
| Interfaces: | 4 x 40Gbit LAN 40Gb Ethernet – QSFP+ – QSFP+ ¦ 48 x 10Gbit LAN 10Gb Ethernet – SFP+ – SFP+ ¦ 1 x management |
| General | |
|---|---|
| Authentication Method: | RADIUS, TACACS+ |
| Capacity: | Virtual interfaces (VLANs): 4096 ¦ ACL: 4000 ¦ IPv4 routes: 8000 ¦ IGMP groups: 8000 |
| Compliant Standards: | IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1Qbb, IEEE 802.1Qaz |
| Device Type: | Switch – L3 – Managed |
| Enclosure Type: | Rack-mountable 1U |
| Features: | VLAN support, Broadcast Storm Control, Multicast Storm Control, Unicast Storm Control, Multiple Spanning Tree Protocol (MSTP) support, Access Control List (ACL) support, Quality of Service (QoS), RADIUS support, Equal-Cost Multipath (ECMP), Rapid Per-VLAN Spanning Tree Plus (PVRST+), DHCP relay, Link Aggregation Control Protocol (LACP), Hot Standby Router Protocol (HSRP) support, Virtual Routing and Forwarding (VRF) |
| Jumbo Frame Support: | 9216 bytes |
| MAC Address Table Size: | 256K entries |
| Performance: | Forwarding performance: 1.28 Tbps |
| Ports: | 48 x 10 Gigabit SFP+ + 4 x 40 Gigabit QSFP+ |
| Remote Management Protocol: | SNMP 1, SNMP 2, RMON, Telnet, SNMP 3, SSH-2, CLI |
| Routing Protocol: | RIP-2, BGP, EIGRP, IGMPv2, HSRP, VRRP, OSPFv2, PIM-SM, IGMPv3, EIGRP for IPv6, OSPFv3, MSDP, static IPv4 routing, static IPv6 routing |
| Subtype: | 10 Gigabit Ethernet |
| Miscellaneous | |
|---|---|
| Compliant Standards: | CISPR 22 Class A, BSMI CNS 13438 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, EN55022 Class A, AS/NZS 60950-1, ICES-003 Class A, RoHS, FCC CFR47 Part 15, UL 60950-1 Second Edition, GB 4943, CSA C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, VCCI Class A, EN 300 386 |
| Power | |
|---|---|
| Features: | Front-to-rear air?ow |
| Installed Qty: | 2 (installed) / 2 (max) |
| Power Device: | Internal power supply – hot-plug |
| Power Redundancy: | Yes |
| Power Redundancy Scheme: | 1+1 |
| Voltage Required: | AC 100/230 V (50/60 Hz) |
