Description
Cisco N5548UP-4N2248TR, Nexus 5548UP/4xN2248TP/20xSFP-10G-SR.
Linkom-PC is your source for Refurbished Cisco N5548UP-4N2248TR. Most Cisco N5548UP-4N2248TR are available within 3-4 days.
We make sure each item you receive is ready to use. Any configuration is reset to factory default settings in our REF process.
If you cannot find the product you are searching for, please request a quote.
WHY LINKOM-PC?
- Save 90%+ off the list
- Professional Advice
- Fully Tested
- Fast Delivery
Cisco N5548UP-4N2248TR Technical Specifications
| Dimensions & Weight | |
|---|---|
| Depth: | 74.9 cm |
| Height: | 4.4 cm |
| Weight: | 15.88 kg |
| Width: | 43.9 cm |
| Environmental Parameters | |
|---|---|
| Humidity Range Operating: | 5 – 95% (non-condensing) |
| Max Operating Temperature: | 40 °C |
| Max Storage Temperature: | 70 °C |
| Min Operating Temperature: | 0 °C |
| Min Storage Temperature: | -40 °C |
| Expansion / Connectivity | |
|---|---|
| Expansion Slots: | 1 (total) / 1 (free) x Expansion Slot |
| Interfaces: | 32 x SFP+ ¦ 1 x 1000Base-T RJ-45 management ¦ 1 x console management |
| General | |
|---|---|
| Authentication Method: | RADIUS, TACACS+, MS-CHAP, Secure Shell v.2 (SSH2) |
| Compliant Standards: | IEEE 802.3, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.3ae, IEEE 802.1s, IEEE 801.1p |
| Device Type: | Switch – 32 ports – Managed – with 4x Cisco Nexus 2248TP GE Fabric Extender, 20x 10G SFP module (10G-SR) |
| Enclosure Type: | Rack-mountable 1U |
| Encryption Algorithm: | AES |
| Features: | Layer 2 switching, VLAN support, Syslog support, Weighted Round Robin (WRR) queuing, Broadcast Storm Control, Multicast Storm Control, Unicast Storm Control, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Access Control List (ACL) support, Quality of Service (QoS), Jumbo Frames support, Rapid Per-VLAN Spanning Tree Plus (PVRST+) |
| Jumbo Frame Support: | 9216 bytes |
| MAC Address Table Size: | 32K entries |
| Ports: | 32 x SFP+ |
| Remote Management Protocol: | SNMP 1, SNMP 2, RMON, Telnet, SNMP 3, SSH-2, CLI |
| Subtype: | 10 Gigabit Ethernet |
| Power | |
|---|---|
| Installed Qty: | 2 |
| Power Consumption Operational: | 390 Watt |
| Power Device: | Internal power supply – hot-plug |
| Power Redundancy: | Yes |
| Power Redundancy Scheme: | 1+1 |
| Voltage Required: | AC 120/230 V (50/60 Hz) |
