Cisco N2K-C2248TP-1GE, N2K GE, 2PS, 1 Fan Module, 48×100/1000-T+4x10GE (req SFP+)

150,00

N2K GE, 2PS, 1 Fan Module, 48×100/1000-T+4x10GE (req SFP+)

Available on backorder

SKU: N2K-C2248TP-1GE Categories: , , Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Description

Cisco N2K-C2248TP-1GE, N2K GE, 2PS, 1 Fan Module, 48×100/1000-T+4x10GE (req SFP+).

Linkom-PC is your source for Refurbished Cisco N2K-C2248TP-1GE. Most Cisco N2K-C2248TP-1GE are available within 3-4 days.

We make sure each item you receive is ready to use. Any configuration is reset to factory default settings in our REF process.

If you cannot find the product you are searching for, please request a quote.

WHY LINKOM-PC?

  • Save 90%+ off the list
  • Professional Advice
  • Fully Tested
  • Fast Delivery

Cisco N2K-C2248TP-1GE Technical Specifications

Data transmission
Jumbo frames support:Y
MAC address table:8000 entries
Maximum data transfer rate:40 Gbit/s
Number of queues:8
Store-and-forward:Y
Supported data transfer rates:10/100/1000 Mbps
Switching capacity:176 Gbit/s
Design
Certification:CE, 47CFR, AS/NZS CISPR, EN, VCCI, KN22, CNS, RoHS
Compatible products:Nexus 5000, Nexus 7000
Number of fans:1 fan(s)
Product colour:Silver
Safety:UL 60950-1, CAN/CSA-C22.2, IEC 60950-1AS/NZS
Management features
MIB support:ENTITY-MIB, IF-MIB, EXT-MIB, ENTITY-EXT-MIB, ENTITY-FRU-CNTRL-MIB, ENTITY-SNSR-MIB, ETH-EXT-MIB
Quality of Service (QoS) support:Y
Switch layer:L2
Switch type:Managed
System event log:Y
Multicast features
Multicast support:Y
Network
10G support:Y
Copper ethernet cabling technology:1000BASE-T,1000BASE-TX,100BASE-TX
Flow control support:Y
Full duplex:Y
Networking standards:IEEE 802.1p,IEEE 802.1Q,IEEE 802.3,IEEE 802.3ab,IEEE 802.3ae,IEEE 802.3u,IEEE 802.3x
Spanning tree protocol:Y
Optical fiber
Fiber ethernet cabling technology:10GBASE-LR,10GBASE-SR
Other features
Dimensions (WxDxH):449.6 x 439.4 x 43.7 mm
Ports & interfaces
Basic switching RJ-45 Ethernet ports quantity:48
Fiber ports quantity:4
Power
Input current:1.2 A
Number of power supply units:2
Power consumption (typical):110 W
Redundant power supply (RPS) support:Y
Power over Ethernet (PoE)
Power over Ethernet (PoE):N
Protocols
Management protocols:SNMP v1/v2c/v3
Security
Access Control List (ACL):Y
Static port security:Y

Additional information

Refurbished

Refurbished, tested, any configuration is reset to factory default settings in our REF process.