Cisco ISR4331/K9, Cisco ISR 4331 (3GE,2NIM,1SM,4G FLASH,4G DRAM,IPB)

250,00

Cisco ISR4331/K9, Cisco ISR 4331 (3GE,2NIM,1SM,4G FLASH,4G DRAM,IPB).

Cisco 4331 Integrated Services Router delivers 100 Mbps to 300 Mbps aggregate throughput and offers one Enhanced service-module (SM-X) slot, which supports for both single- and double-wide service modules provides flexibility in deployment options.

Linkom-PC is your source for Refurbished Cisco ISR4331/K9. Most Cisco ISR4331/K9 are available within 3-4 days.

We make sure each item you receive is ready to use. Any configuration is reset to factory default settings in our REF process.

If you cannot find the product you are searching for, please request a quote.

WHY LINKOM-PC?

  • Save 90%+ off the list
  • Professional Advice
  • Fully Tested
  • Fast Delivery

 

Description

Cisco ISR4331/K9, Cisco ISR 4331 (3GE,2NIM,1SM,4G FLASH,4G DRAM,IPB).

Cisco 4331 Integrated Services Router delivers 100 Mbps to 300 Mbps aggregate throughput and offers one Enhanced service-module (SM-X) slot, which supports for both single- and double-wide service modules provides flexibility in deployment options.

Linkom-PC is your source for Refurbished Cisco ISR4331/K9. Most Cisco ISR4331/K9 are available within 3-4 days.

We make sure each item you receive is ready to use. Any configuration is reset to factory default settings in our REF process.

If you cannot find the product you are searching for, please request a quote.

WHY LINKOM-PC?

  • Save 90%+ off the list
  • Professional Advice
  • Fully Tested
  • Fast Delivery

Cisco ISR4331/K9 Technical Data

Dimensions & Weight
Depth:43.815 cm
Height:4.455 cm
Weight:5 kg
Width:43.815 cm
Environmental Parameters
Humidity Range Operating:5 – 85%
Max Operating Temperature:40 °C
Min Operating Temperature:0 °C
Expansion / Connectivity
Expansion Slots:2 (total) / 2 (free) x NIM ¦ 1 (total) / 1 (free) x ISC ¦ 1 (total) / 1 (free) x Enhanced Service Module (SM-X) ¦ 2 (total) / 0 (free) x DIMM 240-pin
Interfaces:WAN / LAN: 2 x 10Base-T/100Base-TX/1000Base-T – RJ-45 ¦ Serial: 1 x console – RJ-45 ¦ Management: 1 x console – mini-USB Type B ¦ Serial: 1 x auxiliary – RJ-45 ¦ USB 2.0: 1 x 4 pin USB Type A ¦ 2 x SFP (mini-GBIC) ¦ Management: 1 x RJ-45
General
Compliant Standards:IEEE 802.3, IEEE 802.1Q, IEEE 802.3ah, IEEE 802.1ag, ANSI T1.101, ITU-T G.823, ITU-T G.824, CISPR 22 Class A, CISPR 24, EN55024, EN55022 Class A, EN50082-1, AS/NZS 60950-1, ICES-003 Class A, CS-03, R&TTE, FCC CFR47 Part 15, UL 60950-1, IEC 60950-1, EN 60950-1, AS/NZS 3548 Class A, GB 4943, VCCI V-3, EN 61000, KN22, KN24, CNS 13438, EN 300 386, CAN/CSA-C22.2 No. 60950-1
Connectivity Technology:Wired
Data Link Protocol:Ethernet, Fast Ethernet, Gigabit Ethernet
Device Type:Router
Enclosure Type:Rack-mountable – modular – 1U
Features:VPN support, VLAN support, Syslog support, IPv6 support, Class-Based Weighted Fair Queuing (CBWFQ), Weighted Random Early Detection (WRED), wall mountable, Access Control List (ACL) support, Quality of Service (QoS), RADIUS support, NetFlow, IPFIX
Flash Memory:4 GB (installed) / 16 GB (max)
Network / Transport Protocol:IPSec, PPPoE, DHCP
Performance:Aggregate throughput: 100 Mbps
RAM:4 GB (installed) / 16 GB (max) DDR3 SDRAM
Remote Management Protocol:SNMP, RMON
Routing Protocol:OSPF, IS-IS, RIP-1, RIP-2, BGP, EIGRP, DVMRP, PIM-SM, IGMPv3, GRE, PIM-SSM, static IPv4 routing, static IPv6 routing, policy-based routing (PBR), IPv4-to-IPv6 Multicast
Miscellaneous
Rack Mounting Kit:Included
Power
Installed Qty:1 (installed) / 1 (max)
Power Device:Internal power supply – 250 Watt
Voltage Required:AC 120/230 V (50/60 Hz)
Software / System Requirements
OS Provided:Cisco IOS IP Base

Additional information

Refurbished

Refurbished, tested, any configuration is reset to factory default settings in our REF process.