Site icon Linkom-PC

Cisco CISCO888W-GN-E-K9, Cisco888 G.SHDSL Sec Router ISDN B/U 802.11n ETSI Comp

Cisco CISCO888W-GN-E-K9, Cisco888 G.SHDSL Sec Router ISDN B/U 802.11n ETSI Comp

Cisco CISCO888W-GN-E-K9, Cisco888 G.SHDSL Sec Router ISDN B/U 802.11n ETSI Comp

Cisco CISCO888W-GN-E-K9, Cisco888 G.SHDSL Sec Router ISDN B/U 802.11n ETSI Comp.

Linkom-PC is your source for Refurbished Cisco CISCO888W-GN-E-K9. Most Cisco CISCO888W-GN-E-K9 are available within 3-4 days.

We make sure each item you receive is ready to use. Any configuration is reset to factory default settings in our REF process.

If you cannot find the product you are searching for, please request a quote.

WHY LINKOM-PC?

Cisco CISCO888W-GN-E-K9 Technical Specifications

Aerial
Aerial: External detachable
Antenna Qty: 3
Directivity: Omni-directional
Gain Level: 2 dBi
Communications
Protocols & Specifications: ITU G.991.2 (G.shdsl)
Type: DSL modem
Dimensions & Weight
Depth: 24.9 cm
Height: 4.4 cm
Width: 32.5 cm
Environmental Parameters
Humidity Range Operating: 10 – 85%
Max Operating Temperature: 40 °C
Min Operating Temperature: 0 °C
Expansion / Connectivity
Expansion Slots: 1 (total) / 1 (free) x ExpressCard ¦ 1 (total) / 1 (free) x memory
Interfaces: LAN: 4 x 10Base-T/100Base-TX – RJ-45 ¦ Management: 1 x console – RJ-45 ¦ WAN: 1 x SHDSL ¦ USB: 1 x 4 pin USB Type A ¦ WAN: 1 x BRI ST – RJ-45
General
Authentication Method: RADIUS, TACACS+
Capacity: IPSec VPN tunnels: 20
Compliant Standards: IEEE 802.1D, IEEE 802.1Q, IEEE 802.11b, IEEE 802.11g, IEEE 802.1x, IEEE 802.11i, Wi-Fi CERTIFIED, IEEE 802.11n (draft 2.0), ETSI, VCCI-II, EN55024, CSA 22.2 No. 60950, EN55022 Class B, AS/NZ 3548 Class B, AS/NZS 60950-1, CS-03, EN 60555-2, UL 60950-1, IEC 60950-1
Connectivity Technology: Wireless, wired
Data Link Protocol: Ethernet, Fast Ethernet, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n (draft 2.0)
Device Type: Wireless router – 4-port switch (integrated)
Enclosure Type: Desktop
Encryption Algorithm: LEAP, DES, Triple DES, MD5, SSL, TLS, PEAP, TTLS, WPA, WPA2, PKI, 128-bit AES, 192-bit AES, 256-bit AES
Features: NAT support, power over Ethernet (PoE), VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Stateful Packet Inspection (SPI), content filtering, DiffServ support, MAC address filtering, Broadcast Storm Control, IPv6 support, Intrusion Prevention System (IPS), Low-latency queuing (LLQ), Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), Wi-Fi Multimedia (WMM) support, Access Control List (ACL) support, Quality of Service (QoS), Link Fragmentation and Interleaving (LFI), DHCP server
Flash Memory: 128 MB
Network / Transport Protocol: L2TP, IPSec, PPPoE, PPPoA
RAM: 256 MB (installed) / 768 MB (max)
Remote Management Protocol: Telnet, SNMP 3, HTTP, HTTPS
Routing Protocol: OSPF, RIP-1, RIP-2, BGP, EIGRP, HSRP, VRRP, NHRP, PIM-SM, GRE
Status Indicators: Port status, power
Power
Power Device: External power adapter – 60 Watt
Voltage Required: AC 120/230 V (50/60 Hz)
Software / System Requirements
OS Provided: Cisco IOS Advanced Security
Exit mobile version