Cisco CISCO886VA-J-K9, Cisco 886VA Annex J router with VDSL2/ADSL2+ over ISDN.
Linkom-PC is your source for Refurbished Cisco CISCO886VA-J-K9. Most Cisco CISCO886VA-J-K9 are available within 3-4 days.
We make sure each item you receive is ready to use. Any configuration is reset to factory default settings in our REF process.
If you cannot find the product you are searching for, please request a quote.
WHY LINKOM-PC?
- Save 90%+ off the list
- Professional Advice
- Fully Tested
- Fast Delivery
Cisco CISCO886VA-J-K9 Technical Specifications
| Communications | |
|---|---|
| Digital Signaling Protocol: | ADSL2+ over ISDN, VDSL2 over ISDN |
| Protocols & Specifications: | ITU G.992.1 (G.DMT), ITU G.994.1 (G.hs), ITU G.992.3 (G.DMT.bis), ITU G.992.5 |
| Type: | ISDN / DSL modem combo |
| Dimensions & Weight | |
|---|---|
| Depth: | 24.9 cm |
| Height: | 4.4 cm |
| Weight: | 2.5 kg |
| Width: | 32.5 cm |
| Environmental Parameters | |
|---|---|
| Humidity Range Operating: | 10 – 85% (non-condensing) |
| Max Operating Temperature: | 40 °C |
| Min Operating Temperature: | 0 °C |
| Expansion / Connectivity | |
|---|---|
| Expansion Slots: | 1 (total) / 1 (free) x SO-DIMM 200-pin |
| Interfaces: | LAN: 4 x 10Base-T/100Base-TX – RJ-45 ¦ Management: 1 x console – RJ-45 ¦ WAN: 1 x ADSL2+ over ISDN ¦ USB: 1 x 4 pin USB Type A ¦ WAN: 1 x BRI ST |
| General | |
|---|---|
| Authentication Method: | RADIUS, TACACS+ |
| Capacity: | IPSec VPN tunnels: 20 |
| Compliant Standards: | IEEE 802.1D, IEEE 802.1Q, IEEE 802.1x, VCCI, CISPR 24, EN 61000-3-2, EN55022, ICES-003, EN 61000-3-3, EN55024, EN50082-1, EN 61000-6-1, EN 50082-2, FCC CFR47 Part 15, EN 300 386 |
| Connectivity Technology: | Wired |
| Data Link Protocol: | Ethernet, Fast Ethernet |
| Device Type: | Router – 4-port switch (integrated) |
| Enclosure Type: | Desktop |
| Encryption Algorithm: | DES, Triple DES, SSL, PKI, 128-bit AES, 192-bit AES, 256-bit AES |
| Features: | Firewall protection, DHCP support, NAT support, VLAN support, auto-uplink (auto MDI/MDI-X), Stateful Packet Inspection (SPI), dynamic DNS server, MAC address filtering, Broadcast Storm Control, Low-latency queuing (LLQ), Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), Spanning Tree Protocol (STP) support, Access Control List (ACL) support, Quality of Service (QoS), DHCP server, DNS proxy |
| Flash Memory: | 128 MB |
| Network / Transport Protocol: | L2TP, IPSec, PPPoE, PPPoA, DHCP, DNS |
| RAM: | 256 MB (installed) / 768 MB (max) – DDR2 SDRAM – SO-DIMM 200-pin |
| Remote Management Protocol: | Telnet, SNMP 3, HTTP, HTTPS, SSH, CLI |
| Routing Protocol: | RIP-1, RIP-2, HSRP, VRRP, GRE, policy-based routing (PBR) |
| Status Indicators: | Port status, power |
| Line Properties | |
|---|---|
| Framing Format: | ANSI T1.413 |
| Power | |
|---|---|
| Power Device: | External power adapter – 60 Watt |
| Voltage Required: | AC 120/230 V (50/60 Hz) |
| Software / System Requirements | |
|---|---|
| OS Provided: | Cisco IOS Advanced Security |