Cisco CISCO886-K9, Cisco 886 ADSL2/2+ AnnexB Router.
Linkom-PC is your source for Refurbished Cisco CISCO886-K9. Most Cisco CISCO886-K9 are available within 3-4 days.
We make sure each item you receive is ready to use. Any configuration is reset to factory default settings in our REF process.
If you cannot find the product you are searching for, please request a quote.
WHY LINKOM-PC?
- Save 90%+ off the list
- Professional Advice
- Fully Tested
- Fast Delivery
Cisco CISCO886-K9 Technical Specifications
| Communications | |
|---|---|
| Digital Signaling Protocol: | ADSL over ISDN, ADSL2+ over ISDN |
| Protocols & Specifications: | ITU G.992.1 (G.DMT) Annex B, ITU G.992.5 Annex B |
| Type: | DSL modem |
| Dimensions & Weight | |
|---|---|
| Depth: | 24.9 cm |
| Height: | 4.4 cm |
| Weight: | 2.5 kg |
| Width: | 32.5 cm |
| Environmental Parameters | |
|---|---|
| Humidity Range Operating: | 10 – 85% |
| Max Operating Temperature: | 40 °C |
| Min Operating Temperature: | 0 °C |
| Expansion / Connectivity | |
|---|---|
| Expansion Slots: | 1 (total) / 1 (free) x SO-DIMM 200-pin |
| Interfaces: | LAN: 4 x 10Base-T/100Base-TX – RJ-45 ¦ Management: 1 x console – RJ-45 ¦ WAN: 1 x ADSL2+ over ISDN ¦ USB: 1 x 4 pin USB Type A ¦ WAN: 1 x BRI ST – RJ-45 |
| General | |
|---|---|
| Authentication Method: | RADIUS, TACACS+ |
| Capacity: | IPSec VPN tunnels: 20 |
| Compliant Standards: | IEEE 802.1D, IEEE 802.1Q, IEEE 802.3af, VCCI-II, EN55024, CSA 22.2 No. 60950, EN55022 Class B, AS/NZ 3548 Class B, AS/NZS 60950-1, CS-03, EN 60555-2, UL 60950-1, IEC 60950-1 |
| Connectivity Technology: | Wired |
| Data Link Protocol: | Ethernet, Fast Ethernet |
| Device Type: | Router – 4-port switch (integrated) |
| Enclosure Type: | Desktop |
| Encryption Algorithm: | DES, Triple DES, SSL, PKI, 128-bit AES, 192-bit AES, 256-bit AES |
| Features: | Firewall protection, DHCP support, NAT support, VLAN support, auto-uplink (auto MDI/MDI-X), Stateful Packet Inspection (SPI), content filtering, dynamic DNS server, MAC address filtering, Broadcast Storm Control, URL filtering, Low-latency queuing (LLQ), Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), Access Control List (ACL) support, Quality of Service (QoS), DHCP server, DNS proxy |
| Flash Memory: | 128 MB |
| Network / Transport Protocol: | L2TP, IPSec, PPPoE, PPPoA, DHCP, DNS |
| RAM: | 256 MB (installed) / 768 MB (max) – DDR2 SDRAM – SO-DIMM 200-pin |
| Remote Management Protocol: | Telnet, SNMP 3, HTTP, HTTPS, FTP, SSH |
| Routing Protocol: | RIP-1, RIP-2, HSRP, VRRP, GRE |
| Status Indicators: | Port status, power |
| Power | |
|---|---|
| Power Device: | External power adapter – 60 Watt |
| Voltage Required: | AC 120/230 V (50/60 Hz) |
| Software / System Requirements | |
|---|---|
| OS Provided: | Cisco IOS Advanced Security |