Site icon Linkom-PC

Cisco CISCO878-SEC-K9, Cisco 878 Security Bundle with Plus Feature Set

Cisco CISCO878-SEC-K9, Cisco 878 Security Bundle with Plus Feature Set

Cisco CISCO878-SEC-K9, Cisco 878 Security Bundle with Plus Feature Set

Cisco CISCO878-SEC-K9, Cisco 878 Security Bundle with Plus Feature Set.

Linkom-PC is your source for Refurbished Cisco CISCO878-SEC-K9. Most Cisco CISCO878-SEC-K9 are available within 3-4 days.

We make sure each item you receive is ready to use. Any configuration is reset to factory default settings in our REF process.

If you cannot find the product you are searching for, please request a quote.

WHY LINKOM-PC?

Cisco CISCO878-SEC-K9 Technical Specifications

Communications
Digital Signaling Protocol: SHDSL
Protocols & Specifications: ITU G.991.2 (G.shdsl)
Type: DSL modem
Dimensions & Weight
Depth: 21.6 cm
Height: 5.1 cm
Weight: 1 kg
Width: 26 cm
Environmental Parameters
Humidity Range Operating: 10 – 85%
Max Operating Temperature: 40 °C
Min Operating Temperature: 0 °C
Expansion / Connectivity
Interfaces: LAN: 4 x 10Base-T/100Base-TX – RJ-45 ¦ WAN: 1 x BRI ST – RJ-45 ¦ Management: 1 x console – RJ-45 ¦ WAN: 1 x SHDSL – RJ-11
General
Authentication Method: RADIUS, TACACS+
Capacity: VPN tunnels: 10
Compliant Standards: IEEE 802.1D, IEEE 802.1x, EN 60950, IEC 61000-3-2, IEC 61000-4-11, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-8, IEC950, VCCI-II, EN55022 Class B, ICES-003 Class B, AS/NZ 3548 Class B, AS/NZS 3260, FCC Part 68, CS-03, UL 1950 Third Edition, EN 60555-2
Connectivity Technology: Wired
Data Link Protocol: Ethernet, Fast Ethernet
Device Type: Router – 4-port switch (integrated)
Enclosure Type: Desktop
Encryption Algorithm: Triple DES, AES
Features: Firewall protection, DHCP support, NAT support, hardware encryption, VPN support, VLAN support, auto-uplink (auto MDI/MDI-X), traffic shaping, manageable, IPv6 support, Intrusion Prevention System (IPS), firmware upgradable, Weighted Fair Queuing (WFQ), Access Control List (ACL) support
Flash Memory: 24 MB (installed) / 52 MB (max)
Network / Transport Protocol: PPTP, L2TP, IPSec, PPPoE, PPPoA
RAM: 128 MB (installed) / 256 MB (max)
Remote Management Protocol: SNMP, Telnet, HTTP, HTTPS
Routing Protocol: RIP-1, RIP-2, GRE
Status Indicators: Status
Line Properties
Framing Format: ANSI T1.413
Power
Power Device: External power adapter
Voltage Required: AC 120/230 V (50/60 Hz)
Software / System Requirements
OS Provided: Cisco IOS IP Plus
Exit mobile version