Cisco CISCO878-K9, G.SHDSL Security Router

160,00

G.SHDSL Security Router

Available on backorder

Description

Cisco CISCO878-K9, G.SHDSL Security Router.

Linkom-PC is your source for Refurbished Cisco CISCO878-K9. Most Cisco CISCO878-K9 are available within 3-4 days.

We make sure each item you receive is ready to use. Any configuration is reset to factory default settings in our REF process.

If you cannot find the product you are searching for, please request a quote.

WHY LINKOM-PC?

  • Save 90%+ off the list
  • Professional Advice
  • Fully Tested
  • Fast Delivery

Cisco CISCO878-K9 Technical Specifications

Communications
Digital Signaling Protocol:SHDSL
Protocols & Specifications:ITU G.991.2 (G.shdsl), ITU G.992.1 (G.DMT), ITU G.992.3 (G.DMT.bis)
Type:DSL modem
Dimensions & Weight
Depth:21.6 cm
Height:5.1 cm
Weight:1 kg
Width:26 cm
Environmental Parameters
Humidity Range Operating:10 – 85%
Max Operating Temperature:40 °C
Min Operating Temperature:0 °C
Expansion / Connectivity
Interfaces:LAN: 4 x 10Base-T/100Base-TX – RJ-45 ¦ WAN: 1 x BRI ST – RJ-45 ¦ Management: 1 x console – RJ-45 ¦ WAN: 1 x SHDSL – RJ-11
General
Authentication Method:RADIUS, TACACS+
Compliant Standards:IEEE 802.1x, EN 60950, IEC 61000-3-2, IEC 61000-4-11, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-8, IEC950, VCCI-II, EN55022 Class B, ICES-003 Class B, AS/NZ 3548 Class B, AS/NZS 3260, FCC Part 68, CS-03, UL 1950 Third Edition, EN 60555-2
Connectivity Technology:Wired
Data Link Protocol:Ethernet, Fast Ethernet
Device Type:Router – 4-port switch (integrated)
Enclosure Type:Desktop
Encryption Algorithm:Triple DES, AES
Features:Firewall protection, DHCP support, VPN support, VLAN support, auto-uplink (auto MDI/MDI-X), manageable, IPv6 support, Intrusion Prevention System (IPS)
Flash Memory:24 MB (installed) / 52 MB (max)
Network / Transport Protocol:PPTP, L2TP, IPSec, PPPoE, PPPoA
RAM:128 MB (installed) / 256 MB (max)
Remote Management Protocol:SNMP, Telnet, HTTP
Routing Protocol:RIP-1, RIP-2
Line Properties
Framing Format:ANSI T1.413
Power
Power Device:External power adapter – 26 Watt
Voltage Required:AC 120/230 V (50/60 Hz)

Additional information

Refurbished

Refurbished, tested, any configuration is reset to factory default settings in our REF process.