Site icon Linkom-PC

Cisco CISCO877-SEC-K9, Cisco 877 Security Bundle with Advanced IP Services

Cisco CISCO877-SEC-K9, Cisco 877 Security Bundle with Advanced IP Services

Cisco CISCO877-SEC-K9, Cisco 877 Security Bundle with Advanced IP Services

Cisco CISCO877-SEC-K9, Cisco 877 Security Bundle with Advanced IP Services.

Linkom-PC is your source for Refurbished Cisco CISCO877-SEC-K9. Most Cisco CISCO877-SEC-K9 are available within 3-4 days.

We make sure each item you receive is ready to use. Any configuration is reset to factory default settings in our REF process.

If you cannot find the product you are searching for, please request a quote.

WHY LINKOM-PC?

Cisco CISCO877-SEC-K9 Technical Specifications

Communications
Digital Signaling Protocol: ADSL, ADSL2, ADSL2+
Protocols & Specifications: ITU G.992.1 (G.DMT), ITU G.992.5
Type: DSL modem
Dimensions & Weight
Depth: 21.6 cm
Height: 5.1 cm
Weight: 0.95 kg
Width: 26 cm
Environmental Parameters
Humidity Range Operating: 10 – 85%
Max Operating Temperature: 40 °C
Min Operating Temperature: 0 °C
Expansion / Connectivity
Interfaces: LAN: 4 x 10Base-T/100Base-TX – RJ-45 ¦ WAN: 1 x ADSL – RJ-11 ¦ Management: 1 x console – RJ-45
General
Authentication Method: RADIUS, TACACS+
Capacity: VPN tunnels: 10
Compliant Standards: IEEE 802.1D, IEEE 802.1x, FCC Class B certified, ETSI, EN 60950, IEC 61000-3-2, IEC 61000-4-11, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-8, IEC950, VCCI-II, EN55022 Class B, ICES-003 Class B, AS/NZ 3548 Class B, ACA TS001, AS/NZS 3260, FCC Part 68, CS-03, UL 1950 Third Edition
Connectivity Technology: Wired
Data Link Protocol: Ethernet, Fast Ethernet
Device Type: Router – 4-port switch (integrated)
Enclosure Type: Desktop
Encryption Algorithm: Triple DES, AES
Features: Firewall protection, DMZ port, auto-sensing per device, dynamic IP address assignment, DHCP support, NAT support, hardware encryption, VPN support, PAT support, auto-negotiation, VLAN support, auto-uplink (auto MDI/MDI-X), Stateful Packet Inspection (SPI), dynamic DNS server, manageable, IPv6 support, VPN passthrough, Intrusion Prevention System (IPS), Low-latency queuing (LLQ), Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), Access Control List (ACL) support, Quality of Service (QoS)
Flash Memory: 24 MB (installed) / 52 MB (max)
Network / Transport Protocol: PPTP, L2TP, IPSec, PPPoE, PPPoA
RAM: 128 MB (installed) / 256 MB (max)
Remote Management Protocol: SNMP, Telnet, HTTP, HTTPS
Routing Protocol: RIP-1, RIP-2, HSRP, VRRP, GRE
Status Indicators: Port status, power
Line Properties
Framing Format: ANSI T1.413
Power
Power Device: External power adapter – 26 Watt
Voltage Required: AC 120/230 V (50/60 Hz)
Software / System Requirements
OS Provided: Cisco IOS IP Plus
Exit mobile version