Description

Cisco CISCO871-K9, Dual Ethernet Security Router.

Linkom-PC is your source for Refurbished Cisco CISCO871-K9. Most Cisco CISCO871-K9 are available within 3-4 days.

We make sure each item you receive is ready to use. Any configuration is reset to factory default settings in our REF process.

If you cannot find the product you are searching for, please request a quote.

WHY LINKOM-PC?

  • Save 90%+ off the list
  • Professional Advice
  • Fully Tested
  • Fast Delivery

Cisco CISCO871-K9 Technical Specifications

Dimensions & Weight
Depth:21.6 cm
Height:5.1 cm
Weight:0.95 kg
Width:26 cm
Environmental Parameters
Humidity Range Operating:10 – 85%
Max Operating Temperature:40 °C
Min Operating Temperature:0 °C
Expansion / Connectivity
Interfaces:LAN: 4 x 10Base-T/100Base-TX – RJ-45 ¦ Management: 1 x console – RJ-45 ¦ WAN: 1 x 10Base-T/100Base-TX – RJ-45 ¦ USB: 2 x 4 pin USB Type A
General
Authentication Method:RADIUS, TACACS+
Capacity:VPN tunnels: 10
Compliant Standards:IEEE 802.1D, IEEE 802.1x, USB 2.0, FCC Class B certified, ETSI, EN 60950, IEC 61000-3-2, IEC 61000-4-11, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-8, IEC950, VCCI-II, EN55022 Class B, ICES-003 Class B, AS/NZ 3548 Class B, ACA TS001, AS/NZS 3260, FCC Part 68, CS-03, UL 1950 Third Edition
Connectivity Technology:Wired
Data Link Protocol:Ethernet, Fast Ethernet
Device Type:Router – 4-port switch (integrated)
Enclosure Type:Desktop
Encryption Algorithm:Triple DES, AES
Features:Firewall protection, DMZ port, auto-sensing per device, DHCP support, NAT support, hardware encryption, VPN support, PAT support, auto-negotiation, VLAN support, auto-uplink (auto MDI/MDI-X), traffic shaping, Stateful Packet Inspection (SPI), dynamic DNS server, VPN passthrough, Low-latency queuing (LLQ), Class-Based Weighted Fair Queuing (CBWFQ), Weighted Fair Queuing (WFQ), Access Control List (ACL) support, Quality of Service (QoS), DHCP server
Flash Memory:24 MB (installed) / 52 MB (max)
Network / Transport Protocol:PPTP, L2TP, IPSec, PPPoE
RAM:128 MB (installed) / 256 MB (max)
Remote Management Protocol:Telnet, SNMP 3, HTTP, HTTPS
Routing Protocol:RIP-1, RIP-2, HSRP, VRRP, GRE, policy-based routing (PBR)
Status Indicators:Port status, power
Power
Power Device:External power adapter – 26 Watt
Voltage Required:AC 120/230 V (50/60 Hz)
Software / System Requirements
OS Provided:Cisco IOS Advanced Security

Additional information

Refurbished

Refurbished, tested, any configuration is reset to factory default settings in our REF process.