Site icon Linkom-PC

Cisco CISCO828, Cisco 828 G.SHDSL Router 1E, 1G.SHDSL

Cisco CISCO828, Cisco 828 G.SHDSL Router 1E, 1G.SHDSL

Cisco CISCO828, Cisco 828 G.SHDSL Router 1E, 1G.SHDSL

Cisco CISCO828, Cisco 828 G.SHDSL Router 1E, 1G.SHDSL.

Linkom-PC is your source for Refurbished Cisco CISCO828. Most Cisco CISCO828 are available within 3-4 days.

We make sure each item you receive is ready to use. Any configuration is reset to factory default settings in our REF process.

If you cannot find the product you are searching for, please request a quote.

WHY LINKOM-PC?

Cisco CISCO828 Technical Specifications

Communications
Digital Signaling Protocol: SHDSL
Max Transfer Rate: 2.3 Mbps
Protocols & Specifications: ITU G.991.2 (G.shdsl)
Type: Modem (digital)
Dimensions & Weight
Depth: 21.1 cm
Height: 5.1 cm
Weight: 0.7 kg
Width: 24.6 cm
Environmental Parameters
Humidity Range Operating: 10 – 85%
Max Operating Temperature: 40 °C
Min Operating Temperature: 0 °C
Expansion / Connectivity
Interfaces: WAN: 1 x SHDSL – RJ-45 – 1 ¦ 4 x 10Base-T – RJ-45 – 4 ¦ Management: 1 x console – RJ-45 – 1
General
Built-in Devices: Led panel
Compliant Standards: IEEE 802.3
Connectivity Technology: Wired
Data Link Protocol: Ethernet, ATM
Data Transfer Rate: 10 Mbps
Device Type: Router
Enclosure Type: Desktop – modular
Features: Scalable Clustering, routing, IP-routing, NAT support, CHAP authentication, PAP authentication, Triple DES, manageable
Flash Memory: 8 MB (installed) / 16 MB (max)
Network / Transport Protocol: TCP/IP
Processor: 50 MHz
RAM: 16 MB (installed) / 32 MB (max)
Remote Management Protocol: SNMP, HTTP
Routing Protocol: RIP
Status Indicators: Collision status, power, link OK, transmit, receive, link/activity
Miscellaneous
Enclosure Colour: Blue
Mounting Kit: Included
Rack Mounting Kit: Not available
Power
Power Device: Internal power supply
Voltage Required: AC 120/230 V (50/60 Hz)
Software / System Requirements
Software Included: Drivers & Utilities
Exit mobile version